p.hard drive
q.keyboard
r.battery
s.ExpressCard
t.SD card
4.Follow the procedures in After Working Inside Your Computer.
Removing the Display-Hinge Cap
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the battery.
3.Remove the screws that secure the
Installing the Display-Hinge Cap
1.Align the
2.Tighten the screws to secure the
3.Install the battery.
4.Follow the procedures in After Working Inside Your Computer.
Removing the Display Assembly
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.battery
b.
c.base cover
d.base corner caps
3.Disconnect the antenna cables connected to the WLAN card and release it from the routing channel. Disconnect the camera cable from the system board.
40