Dell XPS410 manual Removing Memory, PCI Cards

Page 18

10.Click the General tab.

11.To verify that the memory is installed correctly, check the amount of memory (RAM) listed.

Removing Memory

CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface on the computer.

1.Follow the procedures in Before You Begin.

2.Remove the computer cover (see Removing the Computer Cover).

3.Press outward the securing clip at each end of the memory module connector.

4.Grasp the module and pull up.

If the module is difficult to remove, gently ease the module back and forth to remove it from the connector.

Cards

CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface on the computer.

Your Dell™ computer provides the following slots for PCI and PCI Express cards:

•Three PCI card slots

•One PCI Express x1 card slot

•One PCI Express x16 card slot

•One PCI Express x4 card slot

PCI Cards

•If you are installing or replacing a card, follow the procedures in the next section.

•If you are removing but not replacing a card, see Removing a PCI Card.

•If you are replacing a card, remove the current driver for the card from the operating system.

•If you are installing or replacing a PCI Express card, see Installing a PCI Express Card.

Installing a PCI Card

NOTE: Dell offers an optional customer kit for Audigy II and IEEE 1394 PCI add-in-cards that includes a front-mounted IEEE 1394 connector.

1.Follow the procedures in Before You Begin.

2.Remove the computer cover (see Removing the Computer Cover).

3.If your computer includes a card retention mechanism to secure the x16 card, press the release tab downward gently and then pivot the mechanism upward to access the card slots.

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Model Dcta August 2006 Rev. A00 About Your Computer Front View of the ComputerBack Panel Connectors Back View of the ComputerBack to Contents Diagnostic Lights Advanced TroubleshootingPower Lights Problem Description Suggested ResolutionBeep Codes Code CauseSystem setup see Entering System Setup Message Possible Cause Corrective ActionOption Function Dell DiagnosticsDell Diagnostics Main Menu Tab FunctionReinstalling Drivers DriversIdentifying Drivers Resolving Software and Hardware Incompatibilities Click Start, then click Help and SupportRecommended Tools Before You BeginGetting Started Turning Off Your ComputerBack to Contents Removing and Installing Parts Removing the Computer CoverInside View of Your Computer System Board ComponentsMemory Memory OverviewInstalling Memory Addressing Memory With 4-GB ConfigurationsPage Cards Removing MemoryPCI Cards Page Page PCI Express Cards Removing a PCI CardPage Page Removing a PCI Express Card Drive Panels Removing the Drive PanelInstalling the Drive-Panel Insert Removing the Drive-Panel InsertInstalling the Drive Panel DrivesGeneral Installation Guidelines Hard DriveRemoving a Hard Drive Installing a Hard Drive Adding a Second Hard Drive Floppy Drive Removing a Floppy DriveInstalling a Floppy Drive Media Card ReaderRemoving a Media Card Reader Installing a Media Card Reader Installing a CD/DVD Drive CD/DVD DriveRemoving a CD/DVD Drive Battery Power Supply Replacing the BatteryRemoving the Power Supply Installing the Power SupplyProcessor Removing the ProcessorInstalling the Processor Page Panel Panel ComponentsRemoving the I/O Panel Page Installing the I/O Panel Processor Fan Removing the Processor FanInstalling the Processor Fan Card FanRemoving the Card Fan Installing the Card FanSystem Board Removing the System BoardInstalling the System Board Replacing the Computer CoverBack to Contents Specifications Connectors DrivesControls and Lights Power PhysicalEnvironmental System Setup Screens System Setup ProgramEntering System Setup System Setup OptionsDrives Boot Sequence Option SettingsClearing Forgotten Passwords Changing Boot Sequence for the Current BootChanging Boot Sequence for Future Boots Clearing Cmos Settings Flashing the Bios Technical Overview Power Supply DC Connector Pin Assignments DC Power Connector P1 Signal Name Color Wire GaugeDC Power Connect P3, P5, P8, P9, P13, and P14 DC Power Connector P2DC Power Connect P4 DC Power Connector P7DC Power Connectors P10 DC Power Connector P12
Related manuals
Manual 63 pages 47.98 Kb Manual 63 pages 48.17 Kb

XPS410, 410 specifications

The Dell XPS 410, launched in the mid-2000s, was a prominent desktop computer known for its robust performance and modern design. Targeting both enthusiasts and everyday users, the XPS 410 emerged as a reliable option for gaming, media, and general computing tasks.

One of the standout features of the XPS 410 was its sleek and stylish appearance, designed to complement contemporary home and office environments. It boasted a stylish chassis with an integrated lighting system, showcasing Dell's commitment to aesthetics alongside functionality.

The XPS 410 was powered by Intel's Core 2 Duo processor, which offered significant improvements in performance and energy efficiency over its predecessors. Depending on the configuration, users could choose from various processors, allowing for customization based on personal needs. This flexibility made the XPS 410 suitable for resource-intensive applications, such as photo editing, video rendering, and gaming.

Accompanying the powerful processor was a choice of memory options, with support for up to 4GB of DDR2 RAM. This ample memory capacity ensured smooth multitasking and efficient handling of demanding software. Users could also enhance performance through options for high-speed graphics cards, with dedicated GPUs from NVIDIA and ATI, catering to the needs of gamers and graphic designers alike.

In terms of storage, the XPS 410 offered various hard drive configurations, with SATA drives ranging from 250GB to 750GB, ensuring ample space for files, applications, and multimedia. Additionally, with options for RAID configurations, users could benefit from increased data redundancy and improved performance.

The XPS 410 also incorporated advanced technologies such as Dell's Media Center remote control compatibility, allowing for convenient navigation and control of media applications. The inclusion of multiple USB ports and card reader slots made it easy for users to connect a variety of peripherals, enhancing the overall functionality of the system.

Another noteworthy aspect of the XPS 410 was its ability to run Windows Vista, further emphasizing its appeal during a time of transition in consumer operating systems. The combination of powerful hardware and versatile software offerings made the XPS 410 a favored choice among professionals and gamers alike.

In summary, the Dell XPS 410 was a well-rounded desktop computer, featuring powerful processors, ample memory and storage options, and an appealing design. It catered to a wide variety of users, providing performance and versatility that stood out in its era.
Top Page Image Contents