Dell XPS410 manual Media Card Reader, Installing a Floppy Drive

Page 32

5.Pull the sliding plate to the right and hold in place.

6.Slide the floppy drive out of the floppy drive bay.

1

sliding plate

2

floppy drive

 

 

 

 

Installing a Floppy Drive

1.Follow the procedures in Before You Begin.

2.Remove the computer cover (see Removing the Computer Cover).

3.If you are installing a new floppy drive, remove the shoulder screws from the inside of the drive-panel insert and attach the screws to the new drive.

1

floppy drive

2

shoulder screws (4)

 

 

 

 

4.Slide the floppy drive into the floppy drive bay until the sliding plate clicks into place and the drive snaps into position.

5.Attach the power cable to the floppy drive. Attach the floppy-drive cable to the floppy drive and to the system board.

6.Check all cable connections. Fold the ribbon cable and place it across the top of the processor shroud inserting the sides under the clips. Ensure that the cable does not block airflow for the fan and cooling vents.

7.Replace the computer cover.

NOTICE: To connect a network cable, first plug the cable in to the network wall jack and then plug it in to the computer.

8.Connect your computer and devices to their electrical outlets, and then turn them on.

See the documentation that came with the floppy drive for instructions on installing any software required for the operation of the drive.

9.Enter system setup (see Entering System Setup) and select the appropriate Diskette Drive option.

10.Verify that your computer works correctly by running the Dell Diagnostics (see Dell Diagnostics).

Media Card Reader

Image 32
Contents Model Dcta August 2006 Rev. A00 About Your Computer Front View of the ComputerBack Panel Connectors Back View of the ComputerBack to Contents Advanced Troubleshooting Power LightsDiagnostic Lights Problem Description Suggested ResolutionBeep Codes Code CauseSystem setup see Entering System Setup Message Possible Cause Corrective ActionDell Diagnostics Dell Diagnostics Main MenuOption Function Tab FunctionIdentifying Drivers Reinstalling DriversDrivers Resolving Software and Hardware Incompatibilities Click Start, then click Help and SupportBefore You Begin Getting StartedRecommended Tools Turning Off Your ComputerBack to Contents Removing and Installing Parts Removing the Computer CoverInside View of Your Computer System Board ComponentsMemory Memory OverviewInstalling Memory Addressing Memory With 4-GB ConfigurationsPage PCI Cards CardsRemoving Memory Page Page PCI Express Cards Removing a PCI CardPage Page Removing a PCI Express Card Drive Panels Removing the Drive PanelInstalling the Drive-Panel Insert Removing the Drive-Panel InsertInstalling the Drive Panel DrivesRemoving a Hard Drive General Installation GuidelinesHard Drive Installing a Hard Drive Adding a Second Hard Drive Floppy Drive Removing a Floppy DriveInstalling a Floppy Drive Media Card ReaderRemoving a Media Card Reader Installing a Media Card Reader Removing a CD/DVD Drive Installing a CD/DVD DriveCD/DVD Drive Battery Power Supply Replacing the BatteryRemoving the Power Supply Installing the Power SupplyProcessor Removing the ProcessorInstalling the Processor Page Removing the I/O Panel PanelPanel Components Page Installing the I/O Panel Processor Fan Removing the Processor FanInstalling the Processor Fan Card FanInstalling the Card Fan System BoardRemoving the Card Fan Removing the System BoardInstalling the System Board Replacing the Computer CoverBack to Contents Specifications Controls and Lights ConnectorsDrives Environmental PowerPhysical System Setup Program Entering System SetupSystem Setup Screens System Setup OptionsDrives Boot Sequence Option SettingsChanging Boot Sequence for Future Boots Clearing Forgotten PasswordsChanging Boot Sequence for the Current Boot Clearing Cmos Settings Flashing the Bios Technical Overview Power Supply DC Connector Pin Assignments DC Power Connector P1 Signal Name Color Wire GaugeDC Power Connector P2 DC Power Connect P4DC Power Connect P3, P5, P8, P9, P13, and P14 DC Power Connector P7DC Power Connectors P10 DC Power Connector P12
Related manuals
Manual 63 pages 47.98 Kb Manual 63 pages 48.17 Kb

XPS410, 410 specifications

The Dell XPS 410, launched in the mid-2000s, was a prominent desktop computer known for its robust performance and modern design. Targeting both enthusiasts and everyday users, the XPS 410 emerged as a reliable option for gaming, media, and general computing tasks.

One of the standout features of the XPS 410 was its sleek and stylish appearance, designed to complement contemporary home and office environments. It boasted a stylish chassis with an integrated lighting system, showcasing Dell's commitment to aesthetics alongside functionality.

The XPS 410 was powered by Intel's Core 2 Duo processor, which offered significant improvements in performance and energy efficiency over its predecessors. Depending on the configuration, users could choose from various processors, allowing for customization based on personal needs. This flexibility made the XPS 410 suitable for resource-intensive applications, such as photo editing, video rendering, and gaming.

Accompanying the powerful processor was a choice of memory options, with support for up to 4GB of DDR2 RAM. This ample memory capacity ensured smooth multitasking and efficient handling of demanding software. Users could also enhance performance through options for high-speed graphics cards, with dedicated GPUs from NVIDIA and ATI, catering to the needs of gamers and graphic designers alike.

In terms of storage, the XPS 410 offered various hard drive configurations, with SATA drives ranging from 250GB to 750GB, ensuring ample space for files, applications, and multimedia. Additionally, with options for RAID configurations, users could benefit from increased data redundancy and improved performance.

The XPS 410 also incorporated advanced technologies such as Dell's Media Center remote control compatibility, allowing for convenient navigation and control of media applications. The inclusion of multiple USB ports and card reader slots made it easy for users to connect a variety of peripherals, enhancing the overall functionality of the system.

Another noteworthy aspect of the XPS 410 was its ability to run Windows Vista, further emphasizing its appeal during a time of transition in consumer operating systems. The combination of powerful hardware and versatile software offerings made the XPS 410 a favored choice among professionals and gamers alike.

In summary, the Dell XPS 410 was a well-rounded desktop computer, featuring powerful processors, ample memory and storage options, and an appealing design. It catered to a wide variety of users, providing performance and versatility that stood out in its era.