Dell XPS410 manual Replacing the Computer Cover, Installing the System Board

Page 48

3.Disconnect any telephone or telecommunication lines from the computer.

4.Disconnect your computer and all attached devices from their electrical outlets, and then press the power button to ground the system board.

5.Open the computer cover (see Removing the Computer Cover).

6.Remove any components that restrict access to the system board (CD/DVD drive(s), floppy drive, hard drive, I/O panel).

7.Remove the heat-sink assembly and processor.

8.Disconnect all cables from the system board.

9.Remove any memory modules that you are transferring to the new system board (see Removing Memory).

1

system board

2

screws (10)

 

 

 

 

10.Remove the 10 screws from the system board.

11.Slide the system board assembly toward the front of the computer, and then lift the board away.

12.Place the system board assembly that you just removed next to the replacement system board to ensure that it is identical.

Installing the System Board

1.Gently align the board into the chassis and slide it toward the back of the computer.

2.Replace the screws on the system board.

3.Replace any components and cables that you removed from the system board.

4.Install the memory modules that were removed from the old system board (see Installing Memory).

5.Reconnect all cables to their connectors at the back of the computer.

6.Replace the computer cover (see Replacing the Computer Cover).

NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug the cable into the computer. Connect your computer and devices to electrical outlets, and turn them on.

If the new system board requires flashing the BIOS refer to Flashing the BIOS.

Replacing the Computer Cover

CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.

1.Ensure that all cables are connected, and fold cables out of the way.

Gently pull the power cables toward you so that they do not get caught underneath the drives.

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Model Dcta August 2006 Rev. A00 About Your Computer Front View of the ComputerBack Panel Connectors Back View of the ComputerBack to Contents Advanced Troubleshooting Power LightsDiagnostic Lights Problem Description Suggested ResolutionBeep Codes Code CauseSystem setup see Entering System Setup Message Possible Cause Corrective ActionDell Diagnostics Dell Diagnostics Main MenuOption Function Tab FunctionReinstalling Drivers DriversIdentifying Drivers Resolving Software and Hardware Incompatibilities Click Start, then click Help and SupportBefore You Begin Getting StartedRecommended Tools Turning Off Your ComputerBack to Contents Removing and Installing Parts Removing the Computer CoverInside View of Your Computer System Board ComponentsMemory Memory OverviewInstalling Memory Addressing Memory With 4-GB ConfigurationsPage Cards Removing MemoryPCI Cards Page Page PCI Express Cards Removing a PCI CardPage Page Removing a PCI Express Card Drive Panels Removing the Drive PanelInstalling the Drive-Panel Insert Removing the Drive-Panel InsertInstalling the Drive Panel DrivesGeneral Installation Guidelines Hard DriveRemoving a Hard Drive Installing a Hard Drive Adding a Second Hard Drive Floppy Drive Removing a Floppy DriveInstalling a Floppy Drive Media Card ReaderRemoving a Media Card Reader Installing a Media Card Reader Installing a CD/DVD Drive CD/DVD DriveRemoving a CD/DVD Drive Battery Power Supply Replacing the BatteryRemoving the Power Supply Installing the Power SupplyProcessor Removing the ProcessorInstalling the Processor Page Panel Panel ComponentsRemoving the I/O Panel Page Installing the I/O Panel Processor Fan Removing the Processor FanInstalling the Processor Fan Card FanInstalling the Card Fan System BoardRemoving the Card Fan Removing the System BoardInstalling the System Board Replacing the Computer CoverBack to Contents Specifications Connectors DrivesControls and Lights Power PhysicalEnvironmental System Setup Program Entering System SetupSystem Setup Screens System Setup OptionsDrives Boot Sequence Option SettingsClearing Forgotten Passwords Changing Boot Sequence for the Current BootChanging Boot Sequence for Future Boots Clearing Cmos Settings Flashing the Bios Technical Overview Power Supply DC Connector Pin Assignments DC Power Connector P1 Signal Name Color Wire GaugeDC Power Connector P2 DC Power Connect P4DC Power Connect P3, P5, P8, P9, P13, and P14 DC Power Connector P7DC Power Connectors P10 DC Power Connector P12
Related manuals
Manual 63 pages 47.98 Kb Manual 63 pages 48.17 Kb

XPS410, 410 specifications

The Dell XPS 410, launched in the mid-2000s, was a prominent desktop computer known for its robust performance and modern design. Targeting both enthusiasts and everyday users, the XPS 410 emerged as a reliable option for gaming, media, and general computing tasks.

One of the standout features of the XPS 410 was its sleek and stylish appearance, designed to complement contemporary home and office environments. It boasted a stylish chassis with an integrated lighting system, showcasing Dell's commitment to aesthetics alongside functionality.

The XPS 410 was powered by Intel's Core 2 Duo processor, which offered significant improvements in performance and energy efficiency over its predecessors. Depending on the configuration, users could choose from various processors, allowing for customization based on personal needs. This flexibility made the XPS 410 suitable for resource-intensive applications, such as photo editing, video rendering, and gaming.

Accompanying the powerful processor was a choice of memory options, with support for up to 4GB of DDR2 RAM. This ample memory capacity ensured smooth multitasking and efficient handling of demanding software. Users could also enhance performance through options for high-speed graphics cards, with dedicated GPUs from NVIDIA and ATI, catering to the needs of gamers and graphic designers alike.

In terms of storage, the XPS 410 offered various hard drive configurations, with SATA drives ranging from 250GB to 750GB, ensuring ample space for files, applications, and multimedia. Additionally, with options for RAID configurations, users could benefit from increased data redundancy and improved performance.

The XPS 410 also incorporated advanced technologies such as Dell's Media Center remote control compatibility, allowing for convenient navigation and control of media applications. The inclusion of multiple USB ports and card reader slots made it easy for users to connect a variety of peripherals, enhancing the overall functionality of the system.

Another noteworthy aspect of the XPS 410 was its ability to run Windows Vista, further emphasizing its appeal during a time of transition in consumer operating systems. The combination of powerful hardware and versatile software offerings made the XPS 410 a favored choice among professionals and gamers alike.

In summary, the Dell XPS 410 was a well-rounded desktop computer, featuring powerful processors, ample memory and storage options, and an appealing design. It catered to a wide variety of users, providing performance and versatility that stood out in its era.
Top Page Image Contents