Installing the Hard Drive
1.Connect the hard drive cable.
2.Place the hard drive inside the computer.
3.Tighten the screw that secures the hard drive to the computer.
4.Install:
a.Battery
b.Base Cover
5.Follow the procedures in After Working Inside Your computer.
Removing the WLAN Card
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.Base Cover
b.Battery
3.Perform the following steps as shown in the illustration:
a.Loosen the screw that secures the WLAN card to the computer [1].
b.Lift the tab in the direction indicated [2].
c.Disconnect the cables that connect the WLAN card to the computer [3].
12