b.Battery
c.Display Bezel
3.Perform the following steps as shown in the illustration:
a.Disconnect the camera cable from the connector on the camera module [1].
b.Lift and remove the camera from the display assembly [2].
Installing the Camera
1.Connect the camera cable to the connector on the camera module.
2.Align the camera module in its position on the computer.
3.Install:
a.Display Bezel
b.Battery
c.Base Cover
4.Follow the procedures in After Working Inside Your computer.
Removing the System Board
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.Base Cover
b.Battery
c.Hard Drive
d.WLAN Card
e.System Fan
f.Keyboard
g.Base Frame
h.Heatsink
3.Perform the following steps as shown in the illustration:
a.Lift the locking tab [1].
b.Disconnect the LED and touchpad cables [2].
33