Installing the Coin-Cell Battery
1.Place the
2.Connect the
3.Install:
a.Base Frame
b.Keyboard
c.System Fan
d.WLAN Card
e.Hard Drive
f.Battery
g.Base Cover
4.Follow the procedures in After Working Inside Your computer.
Removing the Display Assembly
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.Base Cover
b.Battery
c.Hard Drive
d.WLAN Card
e.System Fan
f.Keyboard
g.Base frame
3.Perform the following steps as shown in the illustration:
a.Disconnect the display assembly cable from the computer [1].
b.Loosen the screw that secures the display assembly [2].
c.Lift the display assembly from the computer [3].
26