Installing the Display Assembly
1.Place the display assembly on the computer.
2.Tighten the screw to secure the display assembly to the computer.
3.Affix the adhesive tape that secures the WLAN cable to the computer.
4.Install:
a.Base frame
b.Keyboard
c.System Fan
d.WLAN Card
e.Hard Drive
f.Battery
g.Base Cover
5.Follow the procedures in After Working Inside Your computer.
Removing the Display Bezel
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.Base Cover
b.Battery
c.Hard Drive
d.WLAN Card
e.System Fan
f.Keyboard
g.Display Assembly
3.Perform the following steps as shown in the illustration:
a.Pry the edges of the display bezel [1].
28