Mackie SP1200 user service Service Information, Appendix a Default Settings

Page 25

Disclaimer

Mackie Industrial continually engages in research related to product improvement, new materials, and production methods. Design refinements are introduced into existing products without notice as a routine expression of that philosophy. For this reason, any current Mackie Industrial product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated.

Mackie Industrial and Sound Palette are trademarks or registered trademarks of Mackie Designs Inc.

All other brand names mentioned are trademarks or registered trademarks of their respective holders, and are hereby acknowledged.

© 2001 All Rights Reserved.

Mackie Industrial.

Printed in the U.S.A.

6. Service Information

In the event that your SP1200 should require servicing, please follow these instructions:

1.Call Mackie Industrial Tech Support at 1-888-337- 7404, 8 am to 5 pm PST (Monday-Friday), to verify the problem and obtain a Return Authorization (RA) Number. Be sure to have the serial number of the unit when you call. You must have a Return Authorization Number in order to obtain warranty service at the factory or at an authorized service center.

2.Pack the unit in its original packaging. This is very important. Mackie Industrial is not responsible for any damage that occurs during shipping due to non-conventional packaging. Original packaging helps to minimize the possibility of shipping damage.

3.Include a legible note stating your name, return shipping address, (no P.O. boxes), daytime phone number, Return Authorization Number, and a detailed description of the problem, including how we can duplicate it.

4.Write the Return Authorization Number in BIG BOLD PRINT on the top of the box.

5.Ship the unit to us. We suggest insurance for all forms of cartage. Ship to this address:

Mackie Industrial

Service Department

16140 Wood-Red Road NE, Suite 5

Woodinville, WA 98072

Appendix A: Default Settings

Control

Setting

 

 

LOCAL/REMOTE

UP (LOCAL)

 

 

PAGING MIC

 

PHANTOM

UP (OFF)

 

 

GAIN +40dB

UP (0dB)

 

 

GAIN

CENTER

 

 

LOW

CENTER (FLAT)

 

 

HIGH

CENTER (FLAT)

 

 

 

ZONE A

 

 

AMP ADDRESS

10000000

 

 

MIC/LINE INPUT

 

GAIN

CENTER

 

 

LOW

CENTER (FLAT)

 

 

HIGH

CENTER (FLAT)

 

 

PHANTOM

UP (OFF)

 

 

GAIN +40dB

UP (0dB)

 

 

MIC VOX

CLOCKWISE (OFF)

 

 

PROGRAM EQ

 

LOW

CENTER (FLAT)

 

 

MID

CENTER (FLAT)

 

 

FREQ

CENTER (1kHz)

 

 

HIGH

CENTER (FLAT)

 

 

INTERNAL BUS

 

ASSIGN (S1/S2)

OFF

 

 

NOTE: All SP1200s sold in the U.S. and Canada are configured for 115 VAC line input and 70V speaker output. All units sold outside the U.S. and Canada are configured for 230 VAC and 100V speaker outputs. Please confirm your configuration prior to installation.

SP1200 – 25

Image 25
Contents Output Suitable For Class 2 Wiring PowerOL on Paging MICTable of Contents Safety InstructionsIntroduction Key FeaturesRear Panel Features Front Panel FeaturesRisk of Fire Replace with Same Type Fuse and Rating LOW High PriorityDo not Open Avis Risque DE Choc Electrique NE PAS Ouvrir Output SuitableApplication Diagrams InstallationTypical Monaural Application Program Inputs Paging MIC Multiple SP1200s-Multiple Zones-Shared SourcesLocal Inputs Paging Program EQExpansion Expansion OUT Expansion with Local MicExpansion Expansion OUT Output Port Comm Remote BUS Outputs Room Combining-ZonesRecord DirectApplications Tips on Installing and Using the SP1200-Plan AheadConnecting the Microphones Connecting the Program SourcesConnecting the Speakers ConnectionsConnecting the Remote Bus Connecting the Expansion BusConnecting the RS485 Serial Port Internal SettingsBus Assign EQ Bypass 70V/100V/8 Ohm SettingsThermal Considerations AC Power ConsiderationsVoltage Conversion Internal Switch and Jumper Settings External Switch SettingsOperation SP1200 Quick StartAmbient MIC Input Local MIC/LINE InputRemote RS485Using the 3-Band EQ Using InputsInput 1 and the Direct Output Input 4 PriorityUsing the Ambient Mic Using the Paging MicSetting the Gain Setting the VOX ThresholdAmbient Mic Calibration and Placement Using the Local MIC/LINE InputUsing the Remote Connection Using the PRE OUT/AMP ConnectionsUsing the RS485 Connection Zone a OutputUsing a 3rd Party Control System Using the SPLinker Sound Palette ControllerUpgrading the Software SP1200 Block Diagram SpecificationsPower Amplifier Section SP1200 SpecificationsAppendix a Default Settings Service InformationAppendix B Button Modes SP1200 Button Modes Press 2 on Power Up Ambient Mic Preamp MeteringAppendix C Voltage Conversion Mackie Industrial