3.Place the bluetooth card in its location in the computer.
4.Tighten the screw to secure the bluetooth card to the system board
5.Install:
a)base cover
b)battery
6.Follow the procedures in After Working Inside Your Computer.
Removing the Memory
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the battery.
3.Remove the base cover.
4.Pry the securing clips away from the memory module until it pops up.
5.Remove the memory module from its connector on the system board by drawing the module from the system board at
6.Repeat steps 2 and 3 to remove the second memory module.
Installing the Memory
1.Insert the memory module into the memory socket.
2.Press the securing clips to secure the memory module to the system board.
3.Install:
a)base cover
b)battery
4.Follow the procedures in After Working Inside Your Computer.
24