Dell E6430S owner manual Installing the Display-Hinge Walls

Page 50

7.Remove the screw that secures the right display-hinge wall to the display assembly.

8.Slide and remove the right display-hinge wall out of the display assembly.

Installing the Display-Hinge Walls

1.Place both the display-hinge walls on the panel.

2.Insert the antenna cables into their opening on the right display-hinge wall and secure them using the adhesive tape to the display assembly.

3.Tighten the screws to secure the display-hinge walls to secure them to the display assembly.

4.Install:

a)power LED board

b)display panel

c)display bezel

d)display assembly

e)display hinge covers

f)media board

g)palmrest

h)bluetooth module

50

Image 50

Contents Regulatory Model P19S Regulatory Type P19S002 Dell Inc Contents Docking Port Information System Setup Technical Specifications Contacting Dell Page Working on Your Computer Before Working Inside Your ComputerTurning Off Your Computer After Working Inside Your ComputerPage Page Removing the Secure Digital SD Card Installing the Secure Digital SD CardRecommended Tools Removing the ExpressCard Installing the ExpressCardRemoving the Battery Installing the Battery Removing the Subscriber Identity Module SIM cardInstalling the SIM Card Removing the Hard DriveInstalling the Hard Drive Removing the Optical Drive Installing the Optical Drive Removing the Keyboard Trim Installing the Base CoverRemoving the Base Cover Installing the Keyboard Trim Removing the KeyboardPage Installing the Keyboard Removing the Bluetooth Module Removing the Wireless Local Area Network Wlan CardInstalling the Wlan Card Installing the Bluetooth Module Installing the Memory Removing the MemoryRemoving the Palmrest Removing the Coin-Cell BatteryInstalling the Coin-Cell Battery Page Installing the Palmrest Removing the Media Board Installing the Media Board Removing the ExpressCard CageInstalling the ExpressCard Cage Removing the Speakers Installing the Speakers Removing the Display-Hinge CoversInstalling the Display Hinge Covers Removing the Display AssemblyPage Page Installing the Display Assembly Removing the System BoardPage Installing the System Board Removing the Heat Sink Installing the Heat Sink Removing the Power Connector PortInstalling the Power-Connector Port Removing the Input/Output I/O Board Installing the I/O Board Removing the Display BezelInstalling the Display Bezel Removing the Display PanelInstalling the Display Panel Removing the Camera and Microphone ModuleInstalling the Camera and Microphone Module Removing the LED Board Installing the LED Board Removing the Display-Hinge WallsPage Installing the Display-Hinge Walls Removing the Display Hinges Installing the Display Hinges Removing the Lvds and Camera CablePage Installing the Lvds and Camera Cable Docking Port Information Page Keys Navigation Boot SequenceNavigation Keys System Setup Options Serial Port Option DescriptionParallel Port Sata OperationStealth Mode Control USB ConfigurationUSB PowerShare Keyboard IlluminationInternal HDD-0 Password Admin PasswordSystem Password Strong PasswordDefault Setting Enable Intel SpeedStep Orom Keyboard AccessAdmin Setup Lockout Default Setting Enable Intel TurboBoostOption Description AC Behavior Wireless Radio ControlPrimary Battery Configuration Auto On TimeNumlock Enable Battery Slice ConfigurationTouchpad/PS-2 Mouse Default Setting Keyboard ErrorsUpdating the Bios Password that you must enter to log on to your system System and Setup PasswordPassword Type Description Setup passwordPress Y to save the changes. The computer reboots Page Enhanced Pre-Boot System Assessment ePSA Diagnostics Device Status LightsTemporary battery failure with AC adapter present Battery Status LightsStorage LED Power LED Wireless LED Fault Description Light Your laptopAudio ProcessorMemory Communications Ports and ConnectorsVideo Contactless Smart CardTouchpad BatteryKeyboard Environmental AC AdapterPhysical Airborne contaminant level G1 as defined by ISA-71.04-1985 Page Contacting Dell Visit support.dell.com