Dell E6430S owner manual Installing the Power-Connector Port

Page 41

k)media board

l)display hinge covers

m)display assembly

n)system board

3.Remove the screw that secures the power connector port to the computer.

4.Remove the power connector bracket from the computer.

5.Remove the power connector port from the computer.

Installing the Power-Connector Port

1.Place the power-connector port on the computer.

2.Place the power-connector bracket over the power-connector port.

3.Tighten the screw to secures the power-connector bracket to the computer.

4.Install:

a)system board

b)display assembly

c)display hinge covers

d)media board

41

Image 41
Contents Regulatory Model P19S Regulatory Type P19S002 Dell Inc Contents Docking Port Information System Setup Technical Specifications Contacting Dell Page Before Working Inside Your Computer Working on Your ComputerAfter Working Inside Your Computer Turning Off Your ComputerPage Page Removing the Secure Digital SD Card Installing the Secure Digital SD CardRecommended Tools Removing the ExpressCard Installing the ExpressCardRemoving the Battery Removing the Subscriber Identity Module SIM card Installing the BatteryRemoving the Hard Drive Installing the SIM CardInstalling the Hard Drive Removing the Optical Drive Installing the Optical Drive Removing the Keyboard Trim Installing the Base CoverRemoving the Base Cover Removing the Keyboard Installing the Keyboard TrimPage Installing the Keyboard Removing the Bluetooth Module Removing the Wireless Local Area Network Wlan CardInstalling the Wlan Card Installing the Bluetooth Module Removing the Memory Installing the MemoryRemoving the Palmrest Removing the Coin-Cell BatteryInstalling the Coin-Cell Battery Page Installing the Palmrest Removing the Media Board Removing the ExpressCard Cage Installing the Media BoardInstalling the ExpressCard Cage Removing the Speakers Removing the Display-Hinge Covers Installing the SpeakersRemoving the Display Assembly Installing the Display Hinge CoversPage Page Removing the System Board Installing the Display AssemblyPage Installing the System Board Removing the Heat Sink Removing the Power Connector Port Installing the Heat SinkInstalling the Power-Connector Port Removing the Input/Output I/O Board Removing the Display Bezel Installing the I/O BoardRemoving the Display Panel Installing the Display BezelRemoving the Camera and Microphone Module Installing the Display PanelInstalling the Camera and Microphone Module Removing the LED Board Removing the Display-Hinge Walls Installing the LED BoardPage Installing the Display-Hinge Walls Removing the Display Hinges Removing the Lvds and Camera Cable Installing the Display HingesPage Installing the Lvds and Camera Cable Docking Port Information Page Keys Navigation Boot SequenceNavigation Keys System Setup Options Parallel Port Option DescriptionSerial Port Sata OperationUSB PowerShare USB ConfigurationStealth Mode Control Keyboard IlluminationSystem Password Admin PasswordInternal HDD-0 Password Strong PasswordAdmin Setup Lockout Orom Keyboard AccessDefault Setting Enable Intel SpeedStep Default Setting Enable Intel TurboBoostPrimary Battery Configuration Wireless Radio ControlOption Description AC Behavior Auto On TimeTouchpad/PS-2 Mouse Default Setting Battery Slice ConfigurationNumlock Enable Keyboard ErrorsUpdating the Bios Password Type Description System and Setup PasswordPassword that you must enter to log on to your system Setup passwordPress Y to save the changes. The computer reboots Page Device Status Lights Enhanced Pre-Boot System Assessment ePSA DiagnosticsStorage LED Power LED Wireless LED Fault Description Battery Status LightsTemporary battery failure with AC adapter present Light Your laptopAudio ProcessorMemory Video Ports and ConnectorsCommunications Contactless Smart CardTouchpad BatteryKeyboard Environmental AC AdapterPhysical Airborne contaminant level G1 as defined by ISA-71.04-1985 Page Visit support.dell.com Contacting Dell