Dell E6430S owner manual Installing the Display Hinge Covers, Removing the Display Assembly

Page 33

f)base cover

g)keyboard trim

h)keyboard

i)bluetooth module

j)palmrest

3.Remove the screws that secure the display-hinge covers to the computer.

4.Remove the display-hinge covers from the computer.

Installing the Display Hinge Covers

1.Tighten the screws to secure the display hinge covers to the computer.

2.Install:

a)palmrest

b)bluetooth module

c)keyboard

d)keyboard trim

e)base cover

f)optical drive

g)hard drive

h)battery

i)ExpressCard

j)SD card

3.Follow the procedures in After Working Inside Your Computer.

Removing the Display Assembly

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

33

Image 33
Contents Regulatory Model P19S Regulatory Type P19S002 Dell Inc Contents Docking Port Information System Setup Technical Specifications Contacting Dell Page Before Working Inside Your Computer Working on Your ComputerAfter Working Inside Your Computer Turning Off Your ComputerPage Page Installing the Secure Digital SD Card Recommended ToolsRemoving the Secure Digital SD Card Installing the ExpressCard Removing the BatteryRemoving the ExpressCard Removing the Subscriber Identity Module SIM card Installing the BatteryRemoving the Hard Drive Installing the SIM CardInstalling the Hard Drive Removing the Optical Drive Installing the Optical Drive Installing the Base Cover Removing the Base CoverRemoving the Keyboard Trim Removing the Keyboard Installing the Keyboard TrimPage Installing the Keyboard Removing the Wireless Local Area Network Wlan Card Installing the Wlan CardRemoving the Bluetooth Module Installing the Bluetooth Module Removing the Memory Installing the MemoryRemoving the Coin-Cell Battery Installing the Coin-Cell BatteryRemoving the Palmrest Page Installing the Palmrest Removing the Media Board Removing the ExpressCard Cage Installing the Media Board Installing the ExpressCard Cage Removing the Speakers Removing the Display-Hinge Covers Installing the SpeakersRemoving the Display Assembly Installing the Display Hinge CoversPage Page Removing the System Board Installing the Display AssemblyPage Installing the System Board Removing the Heat Sink Removing the Power Connector Port Installing the Heat SinkInstalling the Power-Connector Port Removing the Input/Output I/O Board Removing the Display Bezel Installing the I/O BoardRemoving the Display Panel Installing the Display BezelRemoving the Camera and Microphone Module Installing the Display PanelInstalling the Camera and Microphone Module Removing the LED Board Removing the Display-Hinge Walls Installing the LED BoardPage Installing the Display-Hinge Walls Removing the Display Hinges Removing the Lvds and Camera Cable Installing the Display HingesPage Installing the Lvds and Camera Cable Docking Port Information Page Boot Sequence Navigation KeysKeys Navigation System Setup Options Parallel Port Option DescriptionSerial Port Sata OperationUSB PowerShare USB ConfigurationStealth Mode Control Keyboard IlluminationSystem Password Admin PasswordInternal HDD-0 Password Strong PasswordAdmin Setup Lockout Orom Keyboard AccessDefault Setting Enable Intel SpeedStep Default Setting Enable Intel TurboBoostPrimary Battery Configuration Wireless Radio ControlOption Description AC Behavior Auto On TimeTouchpad/PS-2 Mouse Default Setting Battery Slice ConfigurationNumlock Enable Keyboard ErrorsUpdating the Bios Password Type Description System and Setup PasswordPassword that you must enter to log on to your system Setup passwordPress Y to save the changes. The computer reboots Page Device Status Lights Enhanced Pre-Boot System Assessment ePSA DiagnosticsStorage LED Power LED Wireless LED Fault Description Battery Status LightsTemporary battery failure with AC adapter present Light Your laptopProcessor MemoryAudio Video Ports and ConnectorsCommunications Contactless Smart CardBattery KeyboardTouchpad AC Adapter PhysicalEnvironmental Airborne contaminant level G1 as defined by ISA-71.04-1985 Page Visit support.dell.com Contacting Dell