Dell E6430S owner manual Installing the Palmrest

Page 27

7.Disconnect the power LED cable from the system board.

8.Lift the palmrest up and away from the computer.

Installing the Palmrest

1.Align the palmrest assembly to its original position in the computer and snap it into place.

2.Connect the following cables to the system board:

a)power LED cable

b)touchpad cable

c)LED-board cable

3.Tighten the screws to secure the palmrest assembly to the front of the computer.

4.Tighten the screws to secure the palmrest assembly to the base of the computer.

5.Install:

a)bluetooth module

b)keyboard

c)keyboard trim

d)base cover

e)optical drive

27

Image 27

Contents Regulatory Model P19S Regulatory Type P19S002 Dell Inc Contents Docking Port Information System Setup Technical Specifications Contacting Dell Page Before Working Inside Your Computer Working on Your ComputerAfter Working Inside Your Computer Turning Off Your ComputerPage Page Installing the Secure Digital SD Card Recommended ToolsRemoving the Secure Digital SD Card Installing the ExpressCard Removing the BatteryRemoving the ExpressCard Removing the Subscriber Identity Module SIM card Installing the BatteryRemoving the Hard Drive Installing the SIM CardInstalling the Hard Drive Removing the Optical Drive Installing the Optical Drive Installing the Base Cover Removing the Base CoverRemoving the Keyboard Trim Removing the Keyboard Installing the Keyboard TrimPage Installing the Keyboard Removing the Wireless Local Area Network Wlan Card Installing the Wlan CardRemoving the Bluetooth Module Installing the Bluetooth Module Removing the Memory Installing the MemoryRemoving the Coin-Cell Battery Installing the Coin-Cell BatteryRemoving the Palmrest Page Installing the Palmrest Removing the Media Board Removing the ExpressCard Cage Installing the Media BoardInstalling the ExpressCard Cage Removing the Speakers Removing the Display-Hinge Covers Installing the SpeakersRemoving the Display Assembly Installing the Display Hinge CoversPage Page Removing the System Board Installing the Display AssemblyPage Installing the System Board Removing the Heat Sink Removing the Power Connector Port Installing the Heat SinkInstalling the Power-Connector Port Removing the Input/Output I/O Board Removing the Display Bezel Installing the I/O BoardRemoving the Display Panel Installing the Display BezelRemoving the Camera and Microphone Module Installing the Display PanelInstalling the Camera and Microphone Module Removing the LED Board Removing the Display-Hinge Walls Installing the LED BoardPage Installing the Display-Hinge Walls Removing the Display Hinges Removing the Lvds and Camera Cable Installing the Display HingesPage Installing the Lvds and Camera Cable Docking Port Information Page Boot Sequence Navigation KeysKeys Navigation System Setup Options Sata Operation Option DescriptionParallel Port Serial PortKeyboard Illumination USB ConfigurationUSB PowerShare Stealth Mode ControlStrong Password Admin PasswordSystem Password Internal HDD-0 PasswordDefault Setting Enable Intel TurboBoost Orom Keyboard AccessAdmin Setup Lockout Default Setting Enable Intel SpeedStepAuto On Time Wireless Radio ControlPrimary Battery Configuration Option Description AC BehaviorKeyboard Errors Battery Slice ConfigurationTouchpad/PS-2 Mouse Default Setting Numlock EnableUpdating the Bios Setup password System and Setup PasswordPassword Type Description Password that you must enter to log on to your systemPress Y to save the changes. The computer reboots Page Device Status Lights Enhanced Pre-Boot System Assessment ePSA DiagnosticsLight Your laptop Battery Status LightsStorage LED Power LED Wireless LED Fault Description Temporary battery failure with AC adapter presentProcessor MemoryAudio Contactless Smart Card Ports and ConnectorsVideo CommunicationsBattery KeyboardTouchpad AC Adapter PhysicalEnvironmental Airborne contaminant level G1 as defined by ISA-71.04-1985 Page Visit support.dell.com Contacting Dell