Dell DCDO, 710 H2C guide

NOTE: If the card is full-length, press the release tab on the end of the alignment guides on the fan bracket.

1 PCI Express x16 card

2 securing tab

3 PCI Express x16 card slot

8.Install a filler bracket in the empty card-slot opening. If you are replacing the card, see Installing a PCI Express Graphics Card in a Dual Configuration.

NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep dust and dirt out of your computer.

NOTE: The graphics card bridge (not present in all dual-graphics configurations) is not necessary in a single graphics card configuration.

NOTICE: Before rotating the card retainer back into place, ensure that the tops of all cards and filler brackets are flush with the alignment bar and the notch in the top of each card or filler bracket fits around the alignment guide.

NOTICE: Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment.

9. Rotate the card retainer back into its original position; push its tip so that its tab clicks into place.

NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug the cable into the computer.

10.If present, lower the card retention device that lays over the installed cards and snap it into place.

11.Replace the computer cover (see Replacing the Computer Cover), reconnect the computer and devices to electrical outlets, and then turn them on.

Installing a PCI Express Graphics Card in a Dual Configuration

NOTE: To upgrade to or downgrade from a dual-graphics configuration, you will need additional parts that can be ordered from Dell (see Contacting Dell).

This section pertains to dual PCI Express graphics card configurations only. For installation of other types of PCI or PCI Express cards, see Installing PCI and PCI Express Cards.

The PCI Express x1 card slot is not available for use if a graphics card is installed in each of the PCI Express x16 card slots in a dual graphics card configuration. If you are upgrading from a single graphics card to a dual-graphics card configuration, you will need to remove any card installed in the PCI Express x1 card slot (see System Board Components to locate the PCI Express x1 card slot). To remove a PCI Express card, see Removing PCI and PCI Express Cards.

NOTICE: For information about upgrading your system to use dual-graphics technology, see the Dell website at support.dell.com.

To learn more about dual-graphics technology, see "Understanding Dual Graphics Technology" in your Owner's Manual.

710 H2C, DCDO specifications

The Dell DCDO, C100J, represents a significant advancement in the realm of data center technology, focusing on providing enhanced operational efficiency, scalability, and improved performance. Designed with modern enterprises in mind, the C100J integrates cutting-edge features that cater to an array of data center needs.

One of the standout features of the Dell C100J is its modular architecture. This design allows organizations to expand their infrastructure incrementally, ensuring that they can scale according to their growth requirements without incurring hefty upfront costs. The modularity of the C100J makes it versatile, allowing it to adapt to varying workloads and applications efficiently.

Performance-wise, the Dell C100J is equipped with high-speed processing capabilities. It supports the latest generation of Intel Xeon processors, which provide substantial processing power while maintaining energy efficiency. This ensures that enterprises can run demanding applications seamlessly, from data analytics to virtualization, all while consuming less power compared to older models.

Networking is another critical aspect of the Dell C100J. It comes with advanced networking options, including support for 25GbE and 40GbE interfaces, facilitating faster data transmission and reduced latency. This feature is especially beneficial for organizations with high data throughput requirements, enabling them to handle large data sets and ensure quick access to critical information.

Storage flexibility is integral to the Dell DCDO's appeal. The C100J can support various storage options, including SSDs for high-performance tasks and HDDs for cost-effective data storage. Its RAID support further enhances data security and performance, giving users peace of mind regarding data integrity.

Additionally, the Dell C100J is designed with a focus on energy efficiency and Lifecycle management. Its innovative cooling technology optimizes airflow, reducing energy consumption while ensuring that components operate within optimal thermal conditions. This results in lower operational costs and supports corporate sustainability initiatives.

Moreover, management features such as Dell's OpenManage software provide seamless monitoring and management of hardware configurations, firmware updates, and system health checks, enabling IT teams to focus more on strategic initiatives rather than routine maintenance.

In summary, the Dell DCDO, C100J encapsulates a blend of performance, flexibility, and efficiency. Its modular design, high-speed processing capabilities, advanced networking features, and robust management tools make it an ideal choice for enterprises aiming to enhance their data center operations while preparing for future growth.