Dell A90 specifications Troubleshooting Tips

Troubleshooting Tips

NOTE: If the Dell Support Utility is not available from the Start menu, go to support.dell.com and download the software.

For more information about the Dell Support Utility, click the question mark (?) at the top of the Dell™ Support screen.

Dell Diagnostics

CAUTION: Before you begin any of the procedures in this section, read the safety information that shipped with your computer. For additional best practices information see www.dell.com/ regulatory_compliance.

Starting the Dell Diagnostics From Your Solid-state Drive

1Ensure that the computer is connected to a working electrical outlet.

2Turn on (or restart) your computer.

3When the DELL™ logo appears, press <0> immediately. Select Diagnostics from the start menu and press <Enter>.

NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop, and then shut down your computer and try again.

NOTE: If you see a message stating that no diagnostics utility partition has been found, run the Dell Diagnostics from the Drivers and Utilities media.

4Press any key to start the Dell Diagnostics from the diagnostics utility partition on your solid-state drive, and follow the instructions on the screen.

36