Dell 9100 specifications Replacing the Computer Cover

Page 10

Back to Contents Page

Replacing the Computer Cover

Dell™ Dimension™ 9100 Service Manual

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

1.Ensure that all cables are connected, and fold cables out of the way.

Gently pull the power cables toward you so that they do not get caught underneath the drives.

2.Ensure that no tools or extra parts are left inside the computer.

3.Close the cover:

a.Pivot the cover down.

b.Press down on the right side of the cover until it closes.

c.Press down on the left side of the cover until it closes.

d.Ensure that both sides of the cover are locked. If not, repeat all of step 3.

NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.

Connect your computer and devices to electrical outlets, and turn them on.

Back to Contents Page

Image 10

Contents Model Dcta April 2005 Rev. A00 Front View of the Computer Back to ContentsAbout Your Computer Front View of the Computer Back View of the ComputerBack View of the Computer Diagnostic Lights Advanced TroubleshootingPower Lights Power Lights Diagnostic Lights Beep CodesMemory Beep CodesCode Cause Message Possible Cause Corrective Action Program, enter the system setupEnter the system setup program, verify Reseat the memory modulesEnter the system setup program Recommended Tools Before You BeginGetting Started Turning Off Your ComputerBack to Contents Replacing the Computer Cover Removing the Computer Cover Memory Removing and Installing PartsMemory Overview Installing Memory Remove the computer coverCards Removing MemoryRemoving and Installing PCI and PCI Express Cards Page Page Drive Panels Network Adapter and Sound Card SettingsRemoving the Drive Panel Removing the Drive-Panel Insert Replacing the Drive-Panel InsertDrives Connecting Drive CablesReplacing the Drive Panel Hard Drive Drive Interface ConnectorsRemoving a Hard Drive Installing a Hard Drive Adding a Second Hard Drive Removing a Floppy Drive Floppy DriveReplace the computer cover Installing a Floppy Drive Media Card Reader Removing a Media Card ReaderInstalling a Media Card Reader CD/DVD Drive Installing a CD/DVD DriveRemoving a CD/DVD Drive Power Supply Removing the Power SupplyReplacing the Power Supply ProcessorRemoving the Processor Installing the Processor Page Panel Components PanelRemoving the I/O Panel Page Replacing the Battery BatteryReplacing the I/O Panel System Board Removing the System BoardReplacing the System Board Model Dcta April 2005 Rev. A00 Specifications Drives ConnectorsPower Controls and LightsPhysical EnvironmentalSystem Setup Options System SetupEntering System Setup Clearing Forgotten Passwords Clearing Cmos SettingsProcessor has 64-bit Technology DrivesBoot Sequence SecurityClearing Forgotten Passwords Enter system setupClose the computer cover Clearing Cmos SettingsOpen the computer cover Technical Overview Inside View of Your Computer System Board ComponentsPower Supply DC Connector Pin Assignments DC Power Connector P1Pin Number Signal Name Color Wire Gauge DC Power Connector P2DC Power Connect P3 and P5 Pin Number Signal Name 18-AWG WireDC Power Connectors P8, P9, and P10 DC Power Connector P4DC Power Connector P7 DC Power Connector P11DC Power Connector P12

Related manuals

Manual 162 pages 20.69 Kb

Manual 83 pages 12.96 Kb