Dell 9100 specifications Installing a Hard Drive

Page 22

2. Press the tabs on each side of the drive towards each other and slide the drive up and out.

Installing a Hard Drive

1.Unpack the replacement hard drive, and prepare it for installation.

2.Check the documentation for the drive to verify that the drive is configured for your computer.

3.If your replacement hard drive does not have the hard drive bracket attached, remove the bracket from the old hard drive by unsnapping it from the drive.

4.Snap the hard drive bracket onto the replacement hard drive.

5.Install the hard drive into the computer by sliding the drive into place until you feel it click into place.

6. Connect the power and SATA data cables to the hard drive.

Image 22

Contents Model Dcta April 2005 Rev. A00 Front View of the Computer Back to ContentsAbout Your Computer Front View of the Computer Back View of the ComputerBack View of the Computer Diagnostic Lights Advanced TroubleshootingPower Lights Power Lights Diagnostic Lights Beep CodesMemory Beep CodesCode Cause Message Possible Cause Corrective Action Program, enter the system setupEnter the system setup program, verify Reseat the memory modulesEnter the system setup program Recommended Tools Before You BeginGetting Started Turning Off Your ComputerBack to Contents Replacing the Computer Cover Removing the Computer Cover Memory Removing and Installing PartsMemory Overview Installing Memory Remove the computer coverCards Removing MemoryRemoving and Installing PCI and PCI Express Cards Page Page Drive Panels Network Adapter and Sound Card SettingsRemoving the Drive Panel Removing the Drive-Panel Insert Replacing the Drive-Panel InsertDrives Connecting Drive CablesReplacing the Drive Panel Hard Drive Drive Interface ConnectorsRemoving a Hard Drive Installing a Hard Drive Adding a Second Hard Drive Removing a Floppy Drive Floppy DriveReplace the computer cover Installing a Floppy Drive Media Card Reader Removing a Media Card ReaderInstalling a Media Card Reader CD/DVD Drive Installing a CD/DVD DriveRemoving a CD/DVD Drive Power Supply Removing the Power SupplyReplacing the Power Supply ProcessorRemoving the Processor Installing the Processor Page Panel Components PanelRemoving the I/O Panel Page Replacing the Battery BatteryReplacing the I/O Panel System Board Removing the System BoardReplacing the System Board Model Dcta April 2005 Rev. A00 Specifications Drives ConnectorsPower Controls and LightsPhysical EnvironmentalSystem Setup Options System SetupEntering System Setup Clearing Forgotten Passwords Clearing Cmos SettingsProcessor has 64-bit Technology DrivesBoot Sequence SecurityClearing Forgotten Passwords Enter system setupClose the computer cover Clearing Cmos SettingsOpen the computer cover Technical Overview Inside View of Your Computer System Board ComponentsPower Supply DC Connector Pin Assignments DC Power Connector P1Pin Number Signal Name Color Wire Gauge DC Power Connector P2DC Power Connect P3 and P5 Pin Number Signal Name 18-AWG WireDC Power Connectors P8, P9, and P10 DC Power Connector P4DC Power Connector P7 DC Power Connector P11DC Power Connector P12

Related manuals

Manual 162 pages 20.69 Kb

Manual 83 pages 12.96 Kb