Liebert 350-500 VA user manual To Bottom for ionary Markings

Page 13

Other office machines that do not exceed the capacity of the UPS— inkjet printers, scanners and fax machines—may be plugged into either of the two (2) black receptacles, which provide surge protec- tion only.

5.Connect Phone/Fax/DSL/Internet/Modem devices to data line con- nectors.

r to Bottom for ionary Markings

6.Press and release the ON/OFF/Alarm Silence button to turn on the UPS. The UPS will beep and the Utility/Battery Indicator will illu- minate (green).

7.Turn on connected equipment.

8.Connect the USB cable provided with the UPS to the USB ports on the PST and your computer. The PST will work automatically with your built-in power management software on Windows XP and 2000 and Mac OS 10.2 or later (see USB Interface Port section for details).

NOTE

When using the communication features on this UPS, ensure the cabling connected to the UPS communications ports are kept separated from the power leads to the UPS input and output.

9

Page 12 Page 14
Image 13
Page 12 Page 14
Contents PowerSure PST Page Table of Contents Page Safety Precautions Important Safety InstructionsPage Battery Handling Precautions Introduction and System Description Surge protection only Top and Side Views of UPSBattery Charger Transfer SwitchBattery InverterWHAT’S Included Installation To Bottom for ionary Markings Controls and Indicators ON/OFF/Alarm Silence ButtonUtility/Battery Indicator Green Status Indicators Utility/Battery, FaultBattery Mode Normal ModeModes of Operation USB Interface Port Data Line Protection ConnectorsCommunications Maintenance Cleaning the UPSMaintaining Batteries Troubleshooting Guide to Status IndicatorsStart Troubleshooting ChartInput AC Parameters SpecificationsProduct Warranty Registration Battery Run TimesPage Company Behind the Products
Top Page Image Contents