Liebert 350-500 VA user manual USB Interface Port, Data Line Protection Connectors, Communications

Page 17

COMMUNICATIONS

USB Interface Port

The PowerSure PST has a USB interface port for communication that will work with the built-in Microsoft Power Manager software on the user’s PC, if the PC is so equipped. It will provide UPS status and manages the automatic, orderly shutdown of the computer. The UPS (USB) communications meets HID standard, version 1.11. All USB models are compatible with Microsoft Windows 2000, Windows XP and Mac OS 10.2 or later. All USB models ship with a 6 ft. (1.8m) USB cable.

Microsoft, Windows, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Data Line Protection Connectors

Data line (1 input & 2 outputs) connectors are located on the rear of the UPS and provide transient voltage surge suppression (TVSS) for Phone/Fax/DSL/Internet/Modem devices.

13

Image 17
Contents PowerSure PST Page Table of Contents Page Safety Precautions Important Safety InstructionsPage Battery Handling Precautions Introduction and System Description Surge protection only Top and Side Views of UPSBattery Charger Transfer SwitchBattery InverterWHAT’S Included Installation To Bottom for ionary Markings Controls and Indicators ON/OFF/Alarm Silence ButtonUtility/Battery Indicator Green Status Indicators Utility/Battery, FaultModes of Operation Normal ModeBattery Mode Communications Data Line Protection ConnectorsUSB Interface Port Maintaining Batteries Cleaning the UPSMaintenance Troubleshooting Guide to Status IndicatorsStart Troubleshooting ChartInput AC Parameters SpecificationsProduct Warranty Registration Battery Run TimesPage Company Behind the Products