Wolf Appliance Company DCL-200FD Select Audio Output, Output Connector Conditions, Rename Inputs

ProScaler

Settings Audio

Select Audio Output

Scaler -> Main Menu -> Settings -> Select Audio Output

Decision Logic for Auto Select: The table below shows the connector choice for audio when Auto Select is chosen.

Note: “EDID” is information about the capability of a display or AV Receiver that is automatically read by ProScaler over the HDMI or DVI cable.

Output Connector	Conditions
Video/Audio HDMI	Display has audio capability (reported via the EDID). No AV Receiver connected to the Audio HDMI
	port, or an AV Receiver is connected but powered off.
Audio HDMI	AV Receiver with HDMI inputs is connected to the Audio HDMI port and powered on.
Optical	Not Available

If you are using an AV Receiver for processing audio, then you need to configure your receiver to accept audio from the input that is connected to the Wolf Cinema’s ProScaler. You need only do this once, because your Wolf Cinema’s ProScaler will handle HDMI audio switching.

Associate Audio and Video Inputs

Main Menu -> Settings -> Select Audio Input

If you have a non-HDMI input component – Component, Composite or S-Video - this particular function is not available. You must select the desired video input on the Wolf Cinema ProScaler and then select the associated audio input on your outboard AV Receiver or Surround Sound Processor

If your source component uses DVI for video output, and you are connecting to ProScaler using a DVI to HDMI adapter cable, then you will have to connect audio via a separate cable and select the two devices accordingly.

Rename Inputs

Scaler -> Main Menu -> Settings -> Rename Inputs

The Rename Inputs feature lets you customize your setup. The names you enter will appear in the “Select Input” menu.

Use the Arrow keys to move the highlighted character around on the keyboard.

OK puts the selected character in the edit bar.

Cancel exits the window with no changes.

Finish exits the window and applies the new name.

23