Wolf Appliance Company DCL-200FD manual Remote at the Projector, For 2 seconds to turn

ProScaler

Projector: The Projector will remain in a stand-by OFF mode until turned on via the supplied IR remote control, or by receipt of a discrete ON command from your home automation control system.

To activate the Projector, select the TV/Projector button on the IR remote control, then depress and HOLD the green POWER ON button at the top of the remote. The projector will turn on in approximately 30 seconds.

Step 1 - Select the	Step 2 - Aim the
TV/Projector button	remote at the Projector.
to activate all	Depress and HOLD the
the Projector IR	green POWER ON button
commands via the	for 2 seconds to turn
remote control	on the Projector

5Select from the desired components connected to the ProScaler:

Upon power up, the ProScaler defaults to the HDMI #1 input. Other inputs may be directly accessed via the numeric keypad on the ProScaler remote:

To select from available sources, first select the SCALER button, aim the remote at the ProScaler and then depress the desired input button, as noted on the keypad.

13