Wolf Appliance Company DCL-200FD manual Connecting a Computer, Plug and Play Functions PC

ProScaler

Connecting a Computer

Connect the computer by either a 15-pin VGA to RGBHV cable (optional accessory, sold separately) or to a VGA to HDMI converter (also an optional accessory,sold separately). The 15-pin VGA to RGBHV cable may be connected to the appropriate component input (1 or 2, depending on the type of PC sync).

Note: • See page 43 “Computer Compatibility Chart” for a list of computer signals compatible with the system. Use with computer signals other than those listed may cause some of the functions not to work.

•A Macintosh adaptor may be required for use with some Macintosh computers. Contact your nearest Authorized Service Center or Dealer.

•Depending on the computer you are using, an image may not be projected unless the signal output setting of the computer is switched to the external output. Refer to the computer operation manual for switching the computer signal output settings.

“Plug and Play” Functions [PC]

This projector and ProScaler ensemble is compatible with VESA-standard DDC 1/DDC 2B. The system and a VESA DDC compatible computer will communicate their setting requirements, allowing for quick and easy setup.

Before using the “Plug and Play” function, be sure to turn on the projector and ProScaler first and the connected computer last.

15