Wolf Appliance Company DCL-200FD manual Flexible Component Video Inputs

ProScalerHigh Definition Video Processor User’s Manual

Connectivity

Component Video Inputs

Composite Video

S-Video

RS-232 Port GPIO Port

HDMI 1-5 (HDMI 6 on Front Panel)

HDMI Video/Audio Output

HDMI Audio Outpute

AC Input

IR - In

Service

Reset

Flexible Component Video Inputs

This group of connectors can accept 3 types of analog component video inputs:

Component (YPbPr) (2 Inputs)

This is the most common type of component analog signal. Cables are usually 3 RCA-> RCA type.

RGBHV

RGBHV stands for “Red, Green, Blue, Horizontal Sync, Vertical Sync”.

It is commonlyy used to connect a computer’s analog VGA output using the VGA to RGBHV adapter cable.

The Wolf Cinema ProScaler can accept these formats via RGBHV:

VGA	640 x 480 @ 60 Hz
SVGA	800 x 600 @ 60 Hz
XGA	1024 x 768 @ 60 Hz
SXGA	1280 x 1024 @ 60 Hz

RGB + CVBS

For use with a SCART breakout cable. SCART is primarily a European connector type. CVBS means Composite Video Broadcast Signal; typically this would be an analog PAL or SECAM signal. Connect the breakout cable to a SCART connector, then connect Red, Green and Blue to the component inputs, then connect CVBS to the Sync input horizontally adjacent to the component inputs.

Video Input (yellow RCA connector)

Composite video input. This signal is also known as “base band NTSC” and accepts European analog standards PAL and SECAM.

S-Video

S-Video is a analog input signal format similar to base band NTSC (or PAL/SECAM), except that the chroma and luma/sync components are on separate conductors for improved signal quality. If you have a choice between Video or S-Video, choose S-Video.

6