ETA Systems ETA-S20 specifications Installation, Specifications

ETA-S20

AC Power Distribution Unit & Surge Suppressor

INSTALLATION

Before installing, we strongly suggest you read the entire manual to ensure you benefit from all the features of the ETA-S20. The ETA-S20 can be placed on a shelf or rack mounted in a standard 19" width rack. When rack mounted, placement within the rack is flexible however the ETA-S20 should be within 6' of a dedicated 20A AC outlet. When rack mounting, use Rack Rail type screws which are 10⁄32" x 1". Always make sure the 20A outlet is properly inspected by a certified electrician prior to connecting the ETA-S20. Make sure to inspect the equipment that is to be plugged into the ETA-S20 to ensure it does not exceed 20A total amperage draw.

SPECIFICATIONS

Type	AC Power Distribution & Surge Suppressor
Front Panel
Outlets	20A NEMA 5-20R, 1 Unswitched
Activation Switch	Rocker, Illuminates Red when in the ON position
Circuit Breaker	20A Resettable
Indicators	AC Power ON Red, AC Protect Active ON Green
Rear Panel
AC Outlets	NEMA 5-20R, 8 Outlets total: 7 Switched, 1 Unswitched
AC Mains Power Cord	9' (2.74m), 12 gauge, AC Plug NEMA 5-20P
Technical Data
Current Rating	Limited to 16A 2000W Continuous
Current Protection	20A AC Mains Breaker
Operating Voltage	102VAC – 132VAC
MOV - New Generation	Qty. 3 Hot to Neutral, Hot to Ground, Neutral to Ground
Clamping Voltage	L-N: 400, L-G: 500, N-G: 400 / 3KA, 8/20µs
Max. Spike Clamping Voltage	6KV, 1.2/50µs
Max. Spike Clamping Resp. Time	<1 nanosecond
Maximum Surge Current	45000A, 8/20µs
Energy Rating	900 Joules, 8/20µs
Noise Attenuation EMI/FRI	40dB @ 10kHz - 100MHz
Temperature Range	5° – 35°C
Humidity Range	5% to 95% R.H.
Mechanical
Chassis Finish	Black
Mounting	Rack Mount, 1 RU
Height	1.75" (1RU, 44.5mm)
Width	19" (482.6mm)
Depth	3.75" (95.5mm)
Weight	5.5 lbs (2.49kg)
Power Consumption	800 milliwatts
Agency Listings	UL and cUL Listed

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800-321-6699 • Fax: 800-996-3821

– 7 – ETAsys.com

Specifications are subject to change without notice.