When spraying small, confined areas, use the valve and knob to make fine adjustments without adjusting the pump.
Air flow valve adjustment
To decrease air flow turn the valve (5) clockwise.
Material flow adjustments (Fig. 1)
For a lighter spray pattern, adjust the air needle (18) closer to the fluid tip and/or reduce the fluid pressure.
To increase air flow, turn the valve (5) counter clock- wise.
For a heavier spray pattern, adjust the air needle (18) farther back from the fluid tip and/or increase the fluid pressure.
NOTE: Withdrawing needle valve (18) too far can force air back into fluid hose, stopping material flow.
Check and thin the material as needed to maintain the proper consistency. The material may thicken as it sits and slow down production or affect the spray pattern.
Flush and dry gun thoroughly at end of each work day.
19 13 – 16 20 23 21 18 | 22 |
| 6 |
|
|
|
|
| 4 |
|
|
|
|
| 8 |
|
|
|
|
| 9 |
| 10 |
|
|
|
|
| |
|
| 1 | 1 |
|
|
|
|
|
|
| |
|
|
| 17 |
|
|
2 |
|
|
| 1 | 11 |
1 |
|
| 1 | 3 |
|
|
| 5 |
|
|
12
1
|
|
|
|
|
| 1 | Apply PST sealant |
|
|
|
|
|
|
|
|
|
| 05614A | |
|
|
|
|
|
|
|
|
|
|
Fig. 1 |
|
|
|
|
|
|
|
|
|
Ref |
|
|
|
| Ref |
|
|
|
|
No | Part No. | Description | Qty | No | Part No. | Description | Qty | ||
1 |
|
| HOSE, coupled, air | 1 | 12 | 238955 | SPRAY GUN, flexhead | 1 | |
| 113377 | Model 238080 | 1 |
|
| (includes items 13 – 16 and 18 – 23) | |||
| 113601 | Model 238807 | 1 | 13 | 190943 | TIP, spray gun, 3/16 in. | 1 | ||
2 |
|
| HOSE or TUBE, fluid, with swivel | 1 | 14 | 190944 | TIP, spray gun, 1/4 in. | 1 | |
| 113378 | Model 238080 (hose) | 1 | 15 | 190945 | TIP, spray gun, 5/16 in. | 1 | ||
| 191633 | Model 238807 (tube) | 1 | 16 | 190946 | TIP, spray gun, 3/8 in. | 1 | ||
3 | 15B565 | VALVE, ball, air | 1 | 17 | 113121 | VALVE, ball, 1 in. | 1 | ||
4 | 190807 | BRACKET, valve, air | 1 | 18 | 190947 | NEEDLE, air | 1 | ||
5 | 112779 | VALVE, needle, air | 1 | 19 | 190948 | CAP, tip retaining | 1 | ||
6 | 113114 | LOCKNUT, 1 in. npt | 1 | 20 | 190942 | HOUSING, spray gun | 1 | ||
7 | 110110 | SEALANT, PST (not shown) | 1 | 21 | 104282 | 1 | |||
8 | 190940 | HANDLE, valve | 1 | 22 | M70895 | BUSHING | 1 | ||
9 | 113387 | SLEEVE, handle | 1 | 23 | 100085 | SCREW | 1 | ||
10 | 15E359 | COUPLER, 1 in. male | 1 | Technical Data |
|
| |||
11 | 119394 | FITTING, air | 1 | Weight . . . . . . . . . . . . . . . . . . . . . . . . 67 oz (1900 grams) | |||||
|
|
|
|
| |||||
This manual contains English. MM 308603
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN
308603 April 1996, Revised 8/2007