D-Link DSL-522T manual Access the Configuration Manager, Login to Home, Enter Password

Page 18

DSL-522T ADSL Router User Guide

Access the Configuration Manager

In order to make sure your computer’s IP settings allow it to communicate with the Router, it is advisable to configure your system be a DHCP client – that is, it will get IP settings from the Router. Appendix B describes how to configure different Windows operating systems to “Obtain IP settings automatically”.

Be sure that the web browser on your computer is not configured to use a proxy server in the Internet settings. In Windows Internet Explorer, you can check if a proxy server is enabled using the following procedure:

1.In Windows, click on the Start button and choose Control Panel.

2.In the Control Panel window, click on the Network and Internet Options icon.

3. In the Network and Internet Connections window, click the Internet Options icon.

4. In the Internet Properties window, click on the Connections tab and click on the LAN Settings

Note button

5.Verify that the “Use a proxy server for your LAN (These settings will not apply to dial-up or VPN connections).” option is NOT checked. If it is checked, click in the checked box to deselect the option and click OK.

Alternatively, you can access this Internet Options menu using the Tools pull-down menu in Internet Explorer.

Login to Home Page

To use the web-based management software, launch a suitable web browser and direct it to the IP address of the Router. Type in http:// followed by the default IP address, 192.168.1.1 in the address bar of the browser. The URL in the address bar should read: http://192.168.1.1.

A dialog box prompts for the User Name and Password. Type in the default User Name “admin,” and the default Password “admin” then click the OK button to access the web-based manager.

Enter Password

You should change the web-based manager access user name and password once you have verified that a connection can be established. The user name and password allows any PC within the same subnet as the Router to access the web-based manger.

The user name and password used to access the web-based manager is NOT the same as the ADSL account user name and password needed for PPPoE/PPPoA connections to access the

Note Internet.

8

Image 18
Contents DSL-522T Adsl Router User Guide Table Of Contents Status Before You Start Installation OverviewSetup Wizard Packing ListInstallation Notes Username PasswordWAN Setting Connection TypeInstalling the USB Driver Viii DSL-522T Adsl Router User Guide Page Introduction Router Description and OperationRouter Features Front Panel Display Rear Panel Connections Connect network cablesHardware Installation Power on RouterFactory Reset Button Network Connections Connect Adsl LineConnect Router to Ethernet Basic Router Configuration Computer IP SettingsConfiguration Summary Access the Configuration Manager Login to HomeEnter Password Configure the Router Web Manager First Time Log OnWizard Using the Setup Wizard Choose Time Zone Using the Setup Wizard Choose Connection Type Using the Setup Wizard For PPPoE/PPPoA connections Using the Setup Wizard For Dynamic IP Address connections Using the Setup Wizard For Static IP Address connections Using the Setup Wizard For Bridge Mode connections Using the Setup Wizard Finish and Restart Bridge Mode WAN Settings window Bridge ModeDSL-522T Adsl Router User Guide WAN Settings window Dynamic IP Address Dynamic IP AddressDSL-522T Adsl Router User Guide MAC Address button Dynamic IP Parameters DescriptionCloned MAC Address FirewallWAN Settings window Static IP Static IP AddressDSL-522T Adsl Router User Guide Static IP Parameters Description WAN Settings window PPPoE/PPPoA PPPoE/PPPoADSL-522T Adsl Router User Guide User Name Default RoutePPPoE/PPPoA Description Parameters IP ControlATM Traffic Shaping ATM Settings for WAN connectionService Category ATM Parameters DescriptionATM VC Parameters Description ATM VC SettingsATM VC Settings in WAN Settings window Virtual CircuitLAN Management IP windowDhcp Settings window DhcpDisable the Dhcp Server Use the Router for DhcpDhcp Settings window with Dhcp disabled Static IP on LAN DNS Configuration window DNSDynamic DNS Ddns Parameters DescriptionSave Settings and Reboot System Settings windowConfigure Multiple PVCs Select new PVC to configure in the WAN Settings windowMultiple Virtual Connections Configure new PVC Directory Configuration and Read-only WindowsAdvanced Router Management Home Advanced Tools Status HelpUPnP UPnP windowVirtual Server Virtual Server windowCategory Available Rules Custom Forwarding Rules LAN Clients LAN Clients windowSnmp Management Snmp Category ParametersSnmp Management window CommunityFilters Filters windowFilters Parameter Description Bridge Filters Bridge Filters windowStatic Routing Routing Table windowDMZ DMZ windowDos Protection Port Scan Protection Service Filtering Firewall Configura Tion windowFirewall RIP System Wide Configuration window RIPPPP PPP Connection windowAdsl Configuration window AdslATM VC Setting window ATM VCCAdministrator Settings window ToolsChange System Password Remote Web Management and Remote Telnet AccessTop section of the Administrator Settings menu Time Time menuRemote Log Settings window Remote LogSave or Load Configuration File Restore Factory Default SettingsFirmware Upgrade Firmware Upgrade windowPing Test Miscellaneous ConfigurationMiscellaneous Configuration window Igmp ProxyDiagnostic Test Diagnostic Test windowStatus Device InfoDevice Information window Dhcp Clients Log View Log windowStatistics Traffic Statistics windowAdsl Status Adsl Status informationHelp Help windowTechnical Specifications Adsl Standards ADSL2 StandardsWatts max Input 120V AC 60HzOutput 9V DC, 1A To 40CConfiguring IP Settings on Your Computer Configure Windows XP for DhcpControl Panel Click Network and Internet Connections Click Network ConnectionsSelect Obtain an IP address Configure Windows 2000 for Dhcp WindowsWindows ME Configure Windows 95 and Windows 98 for DhcpWindows 95 and Windows Click the Obtain an IP address automatically optionConfigure Windows ME for Dhcp Configure Windows NT 4.0 for DhcpWindows NT 4.0 Workstations Low Pass Filters for DSL In-Line FilterIn-line low pass filter Three Port Filter Port FilterInternational Offices Switzerland