D-Link DSL-522T manual Dynamic DNS, Ddns Parameters Description

Page 47

DSL-522T ADSL Router User Guide

Dynamic DNS

The Router supports DDNS (Dynamic Domain Name Service). The Dynamic DNS service allows a dynamic public IP address to be associated with a static host name in any of the many domains, allowing access to a specified host from various locations on the Internet. This is enabled to allow remote access to a host by clicking a hyperlinked URL in the form hostname.dyndns.org, Many ISPs assign public IP addresses using DHCP, this can make it difficult to locate a specific host on the LAN using standard DNS. If for example you are running a public web server or VPN server on your LAN, this ensures that the host can be located from the Internet if the public IP address changes. DDNS requires that an account be setup with one of the supported DDNS providers.

Dynamic DNS Configuration window

Note: DDNS requires that an account be setup with one of the supported DDNS servers prior to engaging it on the router. This function will not work without an accepted account with a DDNS server.

Enter the required DDNS information and click Apply to set this information in the Router.

DDNS Parameters

Description

DDNS Server

Select one of the DDNS registration organizations form those listed in the

 

pull-down menu. Available servers include DynDns.org and No-IP.com.

Username (or Key)

Enter the username given to you by your DDNS server.

Password (or Key)

Enter the password or key given to you by your DDNS server

Host Name

Enter the host name of the DDNS server.

 

 

37

Image 47
Contents DSL-522T Adsl Router User Guide Table Of Contents Status Packing List Installation OverviewSetup Wizard Before You StartInstallation Notes Connection Type PasswordWAN Setting UsernameInstalling the USB Driver Viii DSL-522T Adsl Router User Guide Page Router Description and Operation IntroductionRouter Features Front Panel Display Connect network cables Rear Panel ConnectionsFactory Reset Button Hardware InstallationPower on Router Connect Router to Ethernet Network ConnectionsConnect Adsl Line Configuration Summary Basic Router ConfigurationComputer IP Settings Enter Password Access the Configuration ManagerLogin to Home Web Manager First Time Log On Configure the RouterWizard Using the Setup Wizard Choose Time Zone Using the Setup Wizard Choose Connection Type Using the Setup Wizard For PPPoE/PPPoA connections Using the Setup Wizard For Dynamic IP Address connections Using the Setup Wizard For Static IP Address connections Using the Setup Wizard For Bridge Mode connections Using the Setup Wizard Finish and Restart WAN Settings window Bridge Mode Bridge ModeDSL-522T Adsl Router User Guide Dynamic IP Address WAN Settings window Dynamic IP AddressDSL-522T Adsl Router User Guide Firewall Dynamic IP Parameters DescriptionCloned MAC Address MAC Address buttonStatic IP Address WAN Settings window Static IPDSL-522T Adsl Router User Guide Static IP Parameters Description PPPoE/PPPoA WAN Settings window PPPoE/PPPoADSL-522T Adsl Router User Guide IP Control Default RoutePPPoE/PPPoA Description Parameters User NameATM Parameters Description ATM Settings for WAN connectionService Category ATM Traffic ShapingVirtual Circuit ATM VC SettingsATM VC Settings in WAN Settings window ATM VC Parameters DescriptionManagement IP window LANDhcp Dhcp Settings windowUse the Router for Dhcp Disable the Dhcp ServerDhcp Settings window with Dhcp disabled Static IP on LAN DNS DNS Configuration windowDdns Parameters Description Dynamic DNSSystem Settings window Save Settings and RebootMultiple Virtual Connections Configure Multiple PVCsSelect new PVC to configure in the WAN Settings window Configure new PVC Home Advanced Tools Status Help Configuration and Read-only WindowsAdvanced Router Management DirectoryUPnP window UPnPVirtual Server window Virtual ServerCategory Available Rules Custom Forwarding Rules LAN Clients window LAN ClientsCommunity Snmp Category ParametersSnmp Management window Snmp ManagementFilters window FiltersFilters Parameter Description Bridge Filters window Bridge FiltersRouting Table window Static RoutingDMZ window DMZFirewall Dos Protection Port Scan Protection Service FilteringFirewall Configura Tion window RIP RIP System Wide Configuration windowPPP Connection window PPPAdsl Adsl Configuration windowATM VCC ATM VC Setting windowTools Administrator Settings windowTop section of the Administrator Settings menu Change System PasswordRemote Web Management and Remote Telnet Access Time menu TimeRemote Log Remote Log Settings windowRestore Factory Default Settings Save or Load Configuration FileFirmware Upgrade window Firmware UpgradeIgmp Proxy Miscellaneous ConfigurationMiscellaneous Configuration window Ping TestDiagnostic Test window Diagnostic TestDevice Information window StatusDevice Info Dhcp Clients View Log window LogTraffic Statistics window StatisticsAdsl Status information Adsl StatusHelp window HelpAdsl Standards ADSL2 Standards Technical SpecificationsTo 40C Input 120V AC 60HzOutput 9V DC, 1A Watts maxControl Panel Configuring IP Settings on Your ComputerConfigure Windows XP for Dhcp Click Network Connections Click Network and Internet ConnectionsSelect Obtain an IP address Windows Configure Windows 2000 for DhcpClick the Obtain an IP address automatically option Configure Windows 95 and Windows 98 for DhcpWindows 95 and Windows Windows MEWindows NT 4.0 Workstations Configure Windows ME for DhcpConfigure Windows NT 4.0 for Dhcp In-line low pass filter Low Pass Filters for DSLIn-Line Filter Port Filter Three Port FilterSwitzerland International Offices