General Technical Specifications | Paradyne 3615, 3616 instruction

COMSPHERE DualFlow Data Service Units

	Table 1-1
General Technical Specifications
Specifications			Criteria

APPROVALS
FCC Part 15	Class A digital device
FCC Part 68	AW292J-61661-DD-N
UL
3615 DualFlow DSU	Listed UL 1950, second edition
3616 DualFlow DSU,	Recognized Component UL 1950, second edition
3000 Series Carrier
CSA
Safety
3615 DualFlow DSU	Certified CSA 22.2, No. 950-M89
3616 DualFlow DSU,	Certified Component CSA 22.2, No. 950-M89
3000 Series Carrier
Emissions	CSA 108.8 ± M1983, Class A digital apparatus
Bell Canada	ªDCTE Specifications,º July 1989, Issue 1

AC POWER REQUIREMENTS
3615 DualFlow DSU	24 Vac (CT), 60 HZ ± 3 (0.115 amp, 9.5 watts at 115 Vac)
3616 DualFlow DSU	24 Vac (CT), 60 Hz +3 (0.080 amp, 8.0 watts at 115 Vac)
3000 Series Carrier (16 DualFlow DSUs,	90Ð132 Vac, 60 Hz + 3 (1.650 amp, 165 watts at 115 Vac)
plus SDU and fan module)

DTE INTERFACE
3615 DualFlow DSU
25-pin D-subminiature connector	EIA-232-D/CCITT V.24 (ISO 2110)
34-pin connector	CCITT V.35 (ISO 2593)
3616 DualFlow DSU with	EIA-232-D/CCITT V.24 (ISO 2110)
25-Pin V.35 Interface	CCITT V.35 (ISO 2593)
Uses a Rear Connector Plate with two	(A V.35 Interconnect Cable is required to use the V.35 connector. The
25-pin D-subminiature connectors.	cable provides an interface between the DSU's 25-pin D-type connector
	and the DTE cable's V.35 connector.)

ENVIRONMENT
Operating Temperature	32° to 122° F (0° to 50° C)
Storage Temperature	±4° to 158° F (±20° to 70° C)
Relative Humidity	5%Ð95% (noncondensing)
Shock and Vibration	Withstands normal shipping and handling

HEAT DISSIPATION (MAX.) AT 115 VAC
3615 DualFlow DSU	29.00 Btu/hr
3616 DualFlow DSU	27.30 Btu/hr
3000 Series Carrier (16 DualFlow DSUs	563.00 Btu/hr
plus SDU and fan module)

NMS COMPATIBILITY	COMSPHEREr 6700 Series NMS, Release 4.0 or greater
	COMSPHEREr 6800 Series NMS, Release 4.1.5 or greater

1-4

December 1996

3615-A2-GB20-20

Image 16

Paradyne 3615, 3616 manual General Technical Specifications, Specifications Criteria

Contents

Comsphere Dualflow Data Service Units Trademarks Warranty, Sales, and Service InformationCopyright 1996 Paradyne Corporation. All rights reserved Important Safety Instructions Government Requirements DDS Interface Data Rate Code Bps Table of Contents Glossary Index Model 3616 DSU Installation and Circuit Pack Lock List of Figures Wire Switched 56 DBM Technical Specifications List of Tables 1Model 3615 ± Digital DDS and 4-Wire Switched 56 kbps Preface How to Use This GuideAbout This Guide Related Documents Reference Documents About Your DualFlow DSU Standard FeaturesOverview DBM Features DBMs Technical Specifications Switched 56 DBMs General Technical Specifications Specifications Criteria DSU Technical Specifications Application DBM Technical Specifications Criteria Modulation and Frequency Wire Switched 56 DBM Technical Specifications Criteria Equipment Warranty and Support Installing the Model DualFlow DSU Before You Begin How to Change Hardware Straps Procedure Permissive V.32 DBM transmit output level of ±9 dBm Where to Place the DSU Installing the DSU Connecting to the Network Power-Up Routine Connecting to the NMS Connecting to the Dial or Pstn Network Connecting to Switched 56 kbps Network Connecting to the DDS or Lads Network Wire Gauge AWG Kbps Network ConnectionLads Connection Distances Data Rate Connecting the DSU to a Router Router Connection Addressing the Unit Verifying Operation and Testing ConnectionsTributary DSU Addressing Verifying DBM Operation Verifying Network Addresses Verifying the Network Other Tests Installing the Model 3616 3 DualFlow DSU Before You Begin Installing the Model 3616 DualFlow DSU Model 3616 DSU Jumper Straps Strap State Function Designation Jumper Strap Comsphere 3000 Series Carrier, Rear View Model 3616 DSU Installation and Circuit Pack Lock V.35 Interconnect Cable Installation Connecting to the Dial or Pstn or Switched 56 kbps Network Connecting to DDS or Lads Network Addressing the Unit To Connect the Sdcp to a DSU CarrSlot 1 a Verifying Network Addresses, the Network, and DBM Operation Operating the DSU Assigning an Address DCP and Sdcp Operation Model 3615 DCP Sdcp and Model 3616 DSU Faceplate Menu Structure Status BranchKeypad Top-Level Menu Health and Status Device Health and StatusExpanded Health and Status Subnetwork Health and Status Circuit Quality IdentityIdentity Descriptions Description Information Displayed Backup Branch Terminal PowerDial Backup Operation Configuring the Unit for Dial Backup Current Backup Effect Backup Mode Command Backup Branch Menu SelectionsUnderstanding Operating Modes Manual Backup Test BranchAbort Device Test Local Loopback DTE LoopbackDigital Loopback Remote Digital Loopback Digital Test Bilateral LoopbackEnd-to-End Test Bit Error Rate Test Bit Error Rate Test Results Information DisplayedEnd-to-End Test Results Results Reported By Information Displayed Selecting an Application Configuration Configuration BranchLamp Test Poll List Configuration OptionsDisplaying the Poll List Changing the Poll List Acquiring the Poll List Directory Entry and Password Characters UseDirectory Entering a Telephone Number Undo Network Address PhoneAssigning an Address Lead States Symbol Control BranchLEDs Transmitter Control Message Branch Displaying External LeadsChanging External Leads Reporting External Lead Changes to NMS Security Functions Available Access Level Security Access LevelsFront Panel DCP Security Unit Configuration DualFlow DSU cannot configure a non-DualFlow DSU remotely Using the DCP to Set Configuration Options Editing Configuration Options Saving Configuration Options Example Using the DCP Load from DiDg Activ Remot Configuration Option Tables Understanding the Tables DSU Configuration Options DSU Port Configuration Options Performs a Digital Loopback DBM Configuration Options DTR Alarm Disab Next Enab Disab PrevLL by DTE Disab Next Enab Disab Prev Bilat LpbkDisab Next Enab Disab Prev CarrLossDisc Yes Next Yes No Prev YesAuto RetrainYes Next Yes No Prev Single Rate No Next Yes No Prev Call SetupNone Next None Pswrd Cllbk Alarm Prev AlarmNone Pswrd EchoCancelDisab Next Enab Disab Prev Remot DBM4-wire Next 2-wire 4-wire PrevWire Primary CoreNo Next Yes No Prev DBM Port Configuration Options DSR FrcOn Enab Next Enab Disab Prev DSR on Tst Enab Next Enab Disab PrevRespondRDL Disab Next Enab Disab Prev RL by DTE Disab Next Enab Disab Prev Stop Bits 1 for DiDg configuration CCN by EL Disab Next Enab Disab PrevNext Prev Will not be displayed Diagnostic DBM Configuration Options Diag Type Disr Next NonD Disr None PrevNonD Disr Trib Diagnostic General Configuration OptionsRemoteDiagEnhan Next V.54 Enhan Prev Backup Configuration Options RestorTimOut 5m Next Chang Prev TriesTimeOut15m Next Chang PrevMultiCallDisab Next Enab Disab Prev DSU Menu a DBM 9.6 C Local Remot Msg Comsphere DualFlow Data Service Units DSU Menu Local/Remote Menu Subbranches From Page A-1 Configuration Worksheets B Overview Instructions DualFlow DSU Configuration Worksheet 1 Date Location Local Phone No Device Local Addr Serial No DualFlow DSU Configuration Worksheet 2 DBM Port Value Status Indicators and C Control Panel Messages Overview Status Indicators Table C-1 DSU Status IndicatorsLabel Color Description Sdcp Status Indicators Control Panel MessagesFormat Health and Status Messages Message Condition Device Health and Status MessagesTable C-3 Table C-3 Device Health and Status Messages Condition Nn.n DDS Table C-4 Expanded Health and Status Messages Table C-5 Subnetwork Health and Status Messages Command Progress Messages Dial Backup Progress MessagesProgress Messages Table C-7 Error Messages Table C-8 Command Error Messages Condition Action DBM DBM Network Connectors Pin Assignments D Hubbing Device Hubbing Device DC OUT DTE Connectors Ccitt Figure D-4. V.35 Interconnect Cable 3000-F1-510 Pin Number CablePlate Crossover Cables Figure D-5. EIA-232-D Crossover Cable 4951-035F Figure D-6. V.35 Crossover Cable 3211-178F Application Configurations E Dial Backup for Received Data Errors Application Dial Backup for Exceeded Load Thresholds Application Frame Relay Simultaneous Diagnostic Application = Field Install Equipment Feature/Part No Comcode = Factory InstallEquipment List F Comsphere 3000 Series Carrier, Installation Manual Equipment Part Number Model 3616 in U.S.A Auto backup Glossary DSR FEP RTS Series Network Index Index-2 Index DTR Index-5 Lads Index-7 Index-8 SDCP, C-3 Verifying