Paradyne 3616, 3615 manual Permissive V.32 DBM transmit output level of ±9 dBm

Installing the Model 3615 DualFlow DSU

FRONT BEZEL

SNAP

TABS

SWITCH 1

HINGE TAB

LOCATIONS

496-14499-01

Figure 2-1. Model 3615 DSU Hardware Switch Location

Table 2-1

Model 3615 DSU Switch Settings

Switch Position	Switch Setting	Function
	ON	Permissive V.32 DBM transmit output level of ±9 dBm
S1-1	(default)
	Off	Programmable V.32 DBM transmit level between ±12 dBm and
		0 dBm
	ON	Frame ground (FG) connected to signal ground (SG)
S1-2
	Off	FG connected to SG through 100 ohm resistor
	(default)
ON is to the rear as you face the front of the DSU.
Off is to the front.

3615-A2-GB20-20 December 1996 2-3