Paradyne 3615, 3616 Circuit Quality, Identity Descriptions, Description Information Displayed

COMSPHERE DualFlow Data Service Units

Circuit Quality

Circuit Quality (CircQ) shows the level and quality of the signal being received from the network by the DBM. This subbranch is only available for a V.32 DBM.

Identity

Identity (ID) displays a listing of the DSU's model and serial numbers, the equipment installed (DBM), software/ firmware versions, the network address, the DDS or DSU's rate, and the DBM's rate.

.Procedure

1.Press the key to scroll ID into view.

2.Press the function key (F1, F2, or F3) directly below the selection. One field at a time is displayed.

3.Press the key to display the information, one display (screen) at a time.

Table 4-1 lists the Identity information provided about the DSU and its equipment.

	Table 4-1
	Identity Descriptions
Description	Information Displayed
Model:	3615 or 3616.
S#:	Unit serial number.
DSU SW ver:	Software/firmware version residing on the DSU.
Netwrk Addr:	Unit's network address.
DSU Rate:	Value set for DSU Rate(Kbps) configuration option; the DSU's aggregate speed. This
	does not appear if a DBM has its DBM Primary Core configuration option set to Yes.
DBM SW ver:	Software/firmware version residing on the Switched 56 DBM.
(Switched 56 DBM only)
DBM Rate:	Value set for DBM Rate(Kbps) configuration option; the DBM's aggregate speed.
DBMtype: xxx yy.y z	Type of DBM installed:
	xxx can be either
	V (V.32 DBM),
	4wS (4-wire Switched 56 DBM), or
	2wS (2-wire Switched 56 DBM).
	yy.y indicates the DBM's maximum speed.
	z designates whether the
	DBM Primary Core option was enabled.
	(A P indicates Primary Core is enabled.)
	Only appears when a DBM is installed.
App Modul:	ASPEN. Appears when the Single-Port Async/Sync feature is installed.
App Modul:	CISC or 64CC.
	CISC when the Clear Channel with Integrated Secondary Channel chip is present.
	64CC when the CISC chip is not present.

4-6 December 1996 3615-A2-GB20-20