Paradyne 3616, 3615 manual Table C-8 Command Error Messages Condition Action

COMSPHERE DualFlow Data Service Units

Error Messages

Table C-8 describes the command error messages;

Table C-9 describes the dial backup error messages.

Table C-8

Command Error Messages

Message	Condition	Action
Conflict w/Envir	Command conflicts with a test in	1. Check for a test in progress.
	progress, or the configuration is	2. Either wait for the test to finish or abort
	inappropriate for this command, etc.
		the test.
		3. If there is no test in progress, check
		configuration options.
Not in Menu	Command is not in the supported set.	Use a valid command.
No Response	Invalid remote address or remote device	Check remote address.
	is not powered, connected to network, or
	enabled.
Command Failed	Command could not execute and none of	If problem cannot be corrected, call your
	the error messages above apply.	service representative.
Inval Selection:	Invalid menu selection based upon	Press any key to return to the top-level
No Valid Choices	previous selections that caused a menu	menu.
	to display with no selectable options.

C-10 December 1996 3615-A2-GB20-20