Diagnostic DBM Configuration Options, NonD, Disr | Paradyne 3616

COMSPHERE DualFlow Data Service Units

Table 5-5

Diagnostic DBM Configuration Options

Diag Type: Disr

Next NonD Disr None Prev

Diagnostic Type. Defines the diagnostic interaction between the control and tributary DBMs in Backup mode. It must be set consistently for all Dualflow DBMs on the same circuit.

NonD	Ð Nondisruptive Diagnostics. An in-band secondary channel transport is derived to carry diagnostics data
		between the control and the tributary DBMs.
Disr	Ð Disruptive Diagnostics. The same (primary) channel that carries user-transmitted data between the
		control and the tributary DBMs also carries diagnostic data. This mode should be selected for
		compatibility with earlier releases that use session-disruptive diagnostics.
None	Ð No diagnostic communications with remote devices; only local diagnostics are allowed.

2nd Ch(bps): 400
Next	100	400	800	1200	1600	Prev

In-band Secondary Channel Diagnostic Transport Speed (in bps). Determines the DBM's port speed when NonD (nondisruptive diagnostics) is selected and there is no excess bandwidth available for in-band secondary channel transport operation. (This configuration option only appears when DiagType = NonD.)

The selection entered here allocates DBM port bandwidth to the in-band secondary channel transport. For example, both the DBM port speed and the backup line speed are 9.6 kbps, and the Diagnostic Type entered is NonD and the In-band Secondary Channel Diagnostic Transport Speed entered is 400. The resulting DBM port speed is 9.2 kbps. (Refer to the following list for valid diagnostic speeds.)

If the DBM Rate(Kbps) is equal to
Port Speed:	Valid diagnostic speeds are:
1.2	100, 400
2.0	100, 400
2.4	100, 400, 800
4.0	100, 400, 800
4.8	100, 400, 800, 1200, 1600
7.2	100, 400, 800, 1200
8.4	100, 400, 1600
9.6	100, 400, 800, 1200, 1600
12.0	100, 400, 800, 1200
14.4	100, 400, 800, 1200, 1600
16.8	100, 400, 800, 1200
18.0	100, 400, 1200
19.2	100, 400, 800, 1200, 1600
28.8	100, 400, 800
32	100, 400, 800, 1200
38.4	100, 400, 800, 1200, 1600
48	100, 400, 800, 1200, 1600
56	100, 400, 800, 1200

5-16

December 1996

3615-A2-GB20-20

Image 81

Paradyne 3616, 3615 manual Diagnostic DBM Configuration Options, Diag Type Disr Next NonD Disr None Prev

Contents

Comsphere Dualflow Data Service Units Warranty, Sales, and Service Information TrademarksCopyright 1996 Paradyne Corporation. All rights reserved Important Safety Instructions Government Requirements Interface Data Rate Code Bps DDS Table of Contents Glossary Index List of Figures Model 3616 DSU Installation and Circuit Pack Lock List of Tables Wire Switched 56 DBM Technical Specifications 1Model 3615 ± Digital DDS and 4-Wire Switched 56 kbps How to Use This Guide PrefaceAbout This Guide Reference Documents Related Documents Standard Features About Your DualFlow DSUOverview DBMs DBM Features Switched 56 DBMs Technical Specifications Specifications Criteria General Technical Specifications Application DSU Technical Specifications Modulation and Frequency DBM Technical Specifications Criteria Wire Switched 56 DBM Technical Specifications Criteria Equipment Warranty and Support Before You Begin Installing the Model DualFlow DSU Procedure How to Change Hardware Straps Permissive V.32 DBM transmit output level of ±9 dBm Installing the DSU Where to Place the DSU Power-Up Routine Connecting to the Network Connecting to the Dial or Pstn Network Connecting to the NMS Connecting to the DDS or Lads Network Connecting to Switched 56 kbps Network Network Connection Wire Gauge AWG KbpsLads Connection Distances Data Rate Router Connection Connecting the DSU to a Router Verifying Operation and Testing Connections Addressing the UnitTributary DSU Addressing Verifying Network Addresses Verifying DBM Operation Other Tests Verifying the Network Installing the Model 3616 3 DualFlow DSU Before You Begin Installing the Model 3616 DualFlow DSU Strap State Function Designation Jumper Strap Model 3616 DSU Jumper Straps Comsphere 3000 Series Carrier, Rear View Model 3616 DSU Installation and Circuit Pack Lock V.35 Interconnect Cable Installation Connecting to the Dial or Pstn or Switched 56 kbps Network Connecting to DDS or Lads Network Addressing the Unit CarrSlot 1 a To Connect the Sdcp to a DSU Verifying Network Addresses, the Network, and DBM Operation Assigning an Address Operating the DSU Model 3615 DCP DCP and Sdcp Operation Sdcp and Model 3616 DSU Faceplate Status Branch Menu StructureKeypad Top-Level Menu Device Health and Status Health and StatusExpanded Health and Status Subnetwork Health and Status Identity Circuit QualityIdentity Descriptions Description Information Displayed Terminal Power Backup BranchDial Backup Operation Configuring the Unit for Dial Backup Backup Branch Menu Selections Current Backup Effect Backup Mode CommandUnderstanding Operating Modes Test Branch Manual BackupAbort Device Test DTE Loopback Local LoopbackDigital Loopback Remote Digital Loopback Bilateral Loopback Digital TestEnd-to-End Test Bit Error Rate Test Results Information Displayed Bit Error Rate TestEnd-to-End Test Results Results Reported By Information Displayed Configuration Branch Selecting an Application ConfigurationLamp Test Configuration Options Poll ListDisplaying the Poll List Changing the Poll List Directory Entry and Password Characters Use Acquiring the Poll ListDirectory Undo Entering a Telephone Number Phone Network AddressAssigning an Address Control Branch Lead States SymbolLEDs Transmitter Control Displaying External Leads Message BranchChanging External Leads Reporting External Lead Changes to NMS Security Access Levels Security Functions Available Access LevelFront Panel DCP Security DualFlow DSU cannot configure a non-DualFlow DSU remotely Unit Configuration Editing Configuration Options Using the DCP to Set Configuration Options Example Using the DCP Saving Configuration Options Load from DiDg Activ Remot Understanding the Tables Configuration Option Tables DSU Configuration Options DSU Port Configuration Options Performs a Digital Loopback DTR Alarm Disab Next Enab Disab Prev DBM Configuration OptionsLL by DTE Disab Next Enab Disab Prev Bilat LpbkDisab Next Enab Disab Prev Yes CarrLossDisc Yes Next Yes No PrevAuto RetrainYes Next Yes No Prev Single Rate No Next Yes No Prev Alarm Call SetupNone Next None Pswrd Cllbk Alarm PrevNone Pswrd Remot DBM4-wire Next 2-wire 4-wire Prev EchoCancelDisab Next Enab Disab PrevWire Primary CoreNo Next Yes No Prev DBM Port Configuration Options DSR on Tst Enab Next Enab Disab Prev DSR FrcOn Enab Next Enab Disab PrevRespondRDL Disab Next Enab Disab Prev RL by DTE Disab Next Enab Disab Prev CCN by EL Disab Next Enab Disab Prev Stop Bits 1 for DiDg configurationNext Prev Will not be displayed Diag Type Disr Next NonD Disr None Prev Diagnostic DBM Configuration OptionsNonD Disr Diagnostic General Configuration Options TribRemoteDiagEnhan Next V.54 Enhan Prev Backup Configuration Options TriesTimeOut15m Next Chang Prev RestorTimOut 5m Next Chang PrevMultiCallDisab Next Enab Disab Prev DBM 9.6 C Local Remot Msg DSU Menu a Comsphere DualFlow Data Service Units DSU Menu From Page A-1 Local/Remote Menu Subbranches Overview Instructions Configuration Worksheets B Date Location Local Phone No Device Local Addr Serial No DualFlow DSU Configuration Worksheet 1 DBM Port Value DualFlow DSU Configuration Worksheet 2 Overview Status Indicators Status Indicators and C Control Panel Messages DSU Status Indicators Table C-1Label Color Description Control Panel Messages Sdcp Status IndicatorsFormat Health and Status Messages Device Health and Status Messages Message ConditionTable C-3 Table C-3 Device Health and Status Messages Condition Nn.n DDS Expanded Health and Status Messages Table C-4 Subnetwork Health and Status Messages Table C-5 Dial Backup Progress Messages Command Progress MessagesProgress Messages Table C-7 Table C-8 Command Error Messages Condition Action Error Messages DBM DBM Pin Assignments D Network Connectors Hubbing Device Hubbing Device DC OUT DTE Connectors Ccitt Figure D-4. V.35 Interconnect Cable 3000-F1-510 Cable Pin NumberPlate Figure D-5. EIA-232-D Crossover Cable 4951-035F Crossover Cables Figure D-6. V.35 Crossover Cable 3211-178F Application Configurations E Dial Backup for Received Data Errors Application Dial Backup for Exceeded Load Thresholds Application Frame Relay Simultaneous Diagnostic Application Equipment Feature/Part No Comcode = Factory Install = Field InstallEquipment List F Comsphere 3000 Series Carrier, Installation Manual Equipment Part Number Model 3616 in U.S.A Glossary Auto backup DSR FEP RTS Series Network Index Index-2 Index DTR Index-5 Lads Index-7 Index-8 SDCP, C-3 Verifying