Paradyne 3615 Command Progress Messages, Table C-7, Dial Backup Progress Messages, Table C-6

Status Indicators and Control Panel Messages

Progress Messages

Table C-6 describes the command progress messages;

Table C-7 describes the dial backup progress messages.

	Table C-6
	Command Progress Messages
Message	Condition
Please wait . . .	Command is taking more than 2 seconds to complete.
Command Complete	Command has been completed.
Command Failed	Command was unable to be executed.

	Table C-7
	Dial Backup Progress Messages
Message	Condition
DBM:Answering	DBM is answering an incoming call.
DBM:Callback	Callback sequence has initiated.
DBM:Connected	DBM is connected.
DBM:Disabled	No calls can be initiated or answered.
DBM:FoundAnswTon	A 4-wire Switched 56 DBM is answering an incoming call.
DBM:Ringing	Ringing at remote DBM or external DBU (dial backup unit).
DBM:Standby	A connection is made but the digital circuit is still the active link.
DBM:Starting Up	The DBM is training for synchronization.
DBM:WaitForAnswr	A call has been placed and the DBM is waiting for connection.
DBM:Wait Callbck	The DBM is expecting a call back from remote DBM or external DBU.
DBM:WaitForSync	Call placed and waiting for connection (2-wire Switched 56 DBM only).
DBM:xxxxxxxxxxx	The last 11 digits for the telephone number that has been dialed.

3615-A2-GB20-20 December 1996 C-9