D-Link DSL-504T manual Router Features

Page 10

DSL-504T DSL Router User’s Guide

Router Features

The DSL-504T ADSL Router utilizes the latest ADSL enhancements to provide a reliable Internet portal suitable for most small to medium sized offices. DSL-504T advantages include:

PPP (Point-to-Point Protocol) Security – The DSL-504T ADSL Router supports PAP (Password Authentication Protocol) and CHAP (Challenge Handshake Authentication Protocol) for PPP connections.

DHCP Support – Dynamic Host Configuration Protocol automatically and dynamically assigns al LAN IP settings to each host on your network. This eliminates the need to reconfigure every host whenever changes in network topology occur.

Network Address Translation (NAT) – For small office environments, the DSL-504T allows multiple users on the LAN to access the Internet concurrently through a single Internet account. This provides Internet access to everyone in the office for the price of a single user.

NAT improves network security in effect by hiding the private network behind one global and visible IP address. NAT address mapping can also be used to link two IP domains via a LAN-to- LAN connection.

TCP/IP (Transfer Control Protocol/Internet Protocol) – The DSL-504T supports TCP/IP protocol, the language used for the Internet. It is compatible with access servers manufactured by major vendors.

RIP – The DSL-504T supports RIP (RIP V1 compatible) to exchange routing information with other routers.

Static Routing – This allows you to select a data path to a particular network destination that will remain in the routing table and never “age out”. If you wish to define a specific route that will always be used for data traffic from your LAN to a specific destination within your LAN (for example to another router or a server) or outside your network (to a ISP defined default gateway for instance).

Default Routing – This allows you to choose a default path for incoming data packets for which the destination address is unknown. This is particularly useful when if the Router functions as the sole connection to the Internet.

ATM (Asynchronous Transfer Mode) – The DSL-504T supports Bridged Ethernet over ATM (RFC1483), IP over ATM (RFC1577) and PPP over ATM (RFC 2364).

Precise ATM Traffic Shaping – Traffic shaping is a method of controlling the flow rate of ATM data cells. This function helps to establish the Quality of Service for ATM data transfer.

G.hs (Auto-handshake)This allows the Router to automatically choose either the G.lite or G.dmt ADSL connection standards.

High Performance – Very high rates of data transfer are possible with the Router. Up to eight Mbps downstream bit rate using the G.dmt.

Full Network Management – The DSL-504T incorporates SNMP (Simple Network Management Protocol) support for web-based management and text-based network management via an RS-232 or Telnet connection.

Telnet Connection – The Telnet enables a network manager to access the Router’s management software remotely.

Easy Installation – The DSL-504T uses a web-based graphical user interface program for convenient management access and easy set up. Any common web browser software can be used to manage the Router.

2

Image 10
Contents DSL-504T Adsl Router User’s Guide FCC Warning Table of Contents Status Information Before You Start Installation OverviewSetup Wizard About This User’s GuideInstallation Requirements Connection PasswordUsername Encapsulation TypePage Introduction What is ADSL?Router Description and Operation Router Features Standards Compatibility and Compliance Status PowerFront Panel Display Link/ActRear Panel Connections Adsl port Connect to Adsl linePower on Router Hardware InstallationFactory Reset Button Connect Adsl Line Network ConnectionsConnect Router to Ethernet Hub or Switch to Router Connection Computer to Router ConnectionConfiguring IP Settings on Your Computer Basic Router ConfigurationWan Configuration Summary Configure Windows XP for Dhcp DSL-504T DSL Router User’s Guide Windows ME Configure Windows 2000 for DhcpWindows Double-click the Network and Dial-up Connections iconWindows 95 and Windows Configure Windows ME for DhcpConfigure Windows 95 and Windows 98 for Dhcp Click the Obtain an IP address automatically optionConfigure Windows NT 4.0 for Dhcp Windows NT 4.0 WorkstationsLogin to Home Access the Configuration ManagerEnter Password Configure the Router Web Manager First Time Log OnUsing the Setup Wizard Used for Router management Cannot be changed DSL-504T DSL Router User’s Guide DSL-504T DSL Router User’s Guide Configure WAN Connection WAN Settings Menu PPPoE / PPPoAPPPoE and PPPoA Connection for WAN WAN Settings Menu Bridge Mode Bridged Connection for WANWAN Settings Static IP Static IP Address for WANLAN IP Settings Configure LAN IP settingsConfigure Dhcp server settings for the LAN Dhcp Server Settings for the LANDisable the Dhcp Server Use the Router for DhcpConfigure DNS Settings DNS Server SettingsDhcp Relay Save Settings and Reboot Save and Reboot menuSelect new PVC to configure in the WAN menu Configure Multiple PVCsMultiple Virtual Connections Configure new VC Advanced Advanced Router ManagementHome ToolsEnable UPnP Menu UPnPPort Forwarding Virtual Server Menu and ListPrivate IP Parameter DescriptionRule Name ProtocolDMZ IP address configuration DMZFilters Configuration Menu FiltersPort, Port Range or Safe Range ports above Dos Protection Port Scan Protection Service Filtering Firewall Configuration MenuFirewall NAT Enable/Disable Menu NATATM Virtual Circuit configuration menu ATMService Category Igmp ProxyStatic Routing Static Routing menuDynamic Routing RIP Dynamic Routing RIP menuRemote Access Remote Management MenusAdministrator Settings change password menu Change System PasswordSystem Tools Administrative functions ToolsRestore Factory Default Settings Save or Load Configuration FileSave System Settings and Restore Defaults Time & Date Configuration TimeFirmware Upgrade FirmwareTest Diagnostic TestPing and Diagnostics Test Menu Ping TestSave & Reboot Dhcp Clients Status InformationDevice Information Display Device Information displayLog Log displayTraffic Traffic Statistics informationAdsl Adsl Status informationTechnical Specifications Physical and Environmental CE Class B, FCC Class B PartAssigning Network IP Addresses IP Address SetupUsing the Default IP Address Manual IP Address AssignmentIP Setup Example #2 Using DhcpChanging the IP Address of the Router IP Concepts IP AddressesIP Network Classes Class Beginning Address Ending AddressSubnet Mask IP Class Subnet MaskMicrofilters and Splitters Microfilter InstallationMicrofilters Line Splitter Installation Line SplitterPage Canada Link Canada Australia Link AustraliaBrazil Chile Link South America Sudamé ricaItaly Link Mediterraneo Srl/D-Link Italia Germany Link Central Europe D-Link Deutschland GmbHIndia Link India Japan Link JapanTurkey Link Middle East Sweden Link SwedenTaiwan Link Taiwan Link U.S.A

DSL-504T specifications

The D-Link DSL-504T is a versatile ADSL modem/router designed to meet the connectivity needs of home users and small offices. Recognized for its robust performance and user-friendly features, it serves as an ideal solution for those seeking reliable internet access through ADSL technology.

At the heart of the D-Link DSL-504T is its ADSL2/2+ compatibility, allowing for high-speed internet connections of up to 24 Mbps downstream and 1 Mbps upstream. This capability ensures that users can enjoy smooth online browsing, streaming, and gaming without interruptions. The device is equipped with a built-in 4-port Ethernet switch, enabling multiple wired devices to connect simultaneously. This feature is particularly valuable in environments where numerous devices require stable internet access, such as in small offices or households with multiple computers.

One of the standout characteristics of the D-Link DSL-504T is its user-friendly setup process. With a web-based management interface, users can easily configure their internet connection and customize settings. This interface provides easy navigation through various configuration options, including security settings, firewall management, and QoS (Quality of Service) provisions to prioritize bandwidth for essential applications.

Security is a top priority for the D-Link DSL-504T, which incorporates robust measures to protect users' networks. It supports WEP, WPA, and WPA2 encryption protocols, ensuring that wireless connections remain secure from unauthorized access. The device also features a built-in firewall that helps safeguard the local network from external threats.

Moreover, the DSL-504T supports various connection methods, including PPPoE, PPPoA, and DHCP, making it adaptable to different internet service providers and network environments. This flexibility ensures seamless integration into existing setups without requiring significant adjustments.

In terms of design, the D-Link DSL-504T features a compact form factor that allows for easy placement in any environment. The LED indicators on the front panel provide real-time status updates for power, DSL, internet, and local network activity, allowing users to monitor their connection at a glance.

In conclusion, the D-Link DSL-504T stands out as a reliable and feature-rich ADSL modem/router. With its high-speed connectivity, multiple connectivity options, robust security features, and user-friendly interface, it effectively caters to the demands of modern internet users while ensuring a stable and secure online experience.