D-Link DSL-504T manual Dynamic Routing RIP menu

Page 51

DSL-504T DSL Router User’s Guide

Dynamic Routing (RIP)

The Router supports RIP v1 and RIP v2 used to share routing tables with other Layer 3 routing devices on your local network or remote LAN.

Dynamic Routing (RIP) menu

To enable RIP, select Enabled from the RIP pull-down menu, select the Protocol (RIPv1 and RIPv1 Compatible) and Direction (In, Out, or Both), and click Apply.

The RIPv1 Compatible option will transmit RIPv2 broadcast packets and receive both RIP v1 and RIP v2 packets.

The direction configuration refers to the RIP request. Select In to allow RIP requests from other devices. Select Out to instruct the Router to make RIP requests for routing tables from other devices. Select Both to share routing tables in both directions.

43

Image 51

Contents DSL-504T Adsl Router User’s Guide FCC Warning Table of Contents Status Information About This User’s Guide Installation OverviewSetup Wizard Before You StartInstallation Requirements Encapsulation Type PasswordUsername ConnectionPage What is ADSL? IntroductionRouter Description and Operation Router Features Standards Compatibility and Compliance Link/Act PowerFront Panel Display StatusAdsl port Connect to Adsl line Rear Panel ConnectionsHardware Installation Power on RouterFactory Reset Button Network Connections Connect Adsl LineConnect Router to Ethernet Computer to Router Connection Hub or Switch to Router ConnectionBasic Router Configuration Configuring IP Settings on Your ComputerWan Configuration Summary Configure Windows XP for Dhcp DSL-504T DSL Router User’s Guide Double-click the Network and Dial-up Connections icon Configure Windows 2000 for DhcpWindows Windows MEClick the Obtain an IP address automatically option Configure Windows ME for DhcpConfigure Windows 95 and Windows 98 for Dhcp Windows 95 and WindowsWindows NT 4.0 Workstations Configure Windows NT 4.0 for DhcpAccess the Configuration Manager Login to HomeEnter Password Web Manager First Time Log On Configure the RouterUsing the Setup Wizard Used for Router management Cannot be changed DSL-504T DSL Router User’s Guide DSL-504T DSL Router User’s Guide WAN Settings Menu PPPoE / PPPoA Configure WAN ConnectionPPPoE and PPPoA Connection for WAN Bridged Connection for WAN WAN Settings Menu Bridge ModeStatic IP Address for WAN WAN Settings Static IPConfigure LAN IP settings LAN IP SettingsUse the Router for Dhcp Dhcp Server Settings for the LANDisable the Dhcp Server Configure Dhcp server settings for the LANDNS Server Settings Configure DNS SettingsDhcp Relay Save and Reboot menu Save Settings and RebootConfigure Multiple PVCs Select new PVC to configure in the WAN menuMultiple Virtual Connections Configure new VC Tools Advanced Router ManagementHome AdvancedUPnP Enable UPnP MenuVirtual Server Menu and List Port ForwardingProtocol Parameter DescriptionRule Name Private IPDMZ DMZ IP address configurationFilters Filters Configuration MenuPort, Port Range or Safe Range ports above Firewall Configuration Menu Dos Protection Port Scan Protection Service FilteringFirewall NAT NAT Enable/Disable Menu ATM ATM Virtual Circuit configuration menuIgmp Proxy Service CategoryStatic Routing menu Static RoutingDynamic Routing RIP menu Dynamic Routing RIPRemote Management Menus Remote AccessTools Change System PasswordSystem Tools Administrative functions Administrator Settings change password menuSave or Load Configuration File Restore Factory Default SettingsSave System Settings and Restore Defaults Time Time & Date ConfigurationFirmware Firmware UpgradePing Test Diagnostic TestPing and Diagnostics Test Menu TestSave & Reboot Device Information display Status InformationDevice Information Display Dhcp ClientsLog display LogTraffic Statistics information TrafficAdsl Status information AdslTechnical Specifications CE Class B, FCC Class B Part Physical and EnvironmentalManual IP Address Assignment IP Address SetupUsing the Default IP Address Assigning Network IP AddressesUsing Dhcp IP Setup Example #2Changing the IP Address of the Router IP Addresses IP ConceptsClass Beginning Address Ending Address IP Network ClassesIP Class Subnet Mask Subnet MaskMicrofilter Installation Microfilters and SplittersMicrofilters Line Splitter Line Splitter InstallationPage Chile Link South America Sudamé rica Australia Link AustraliaBrazil Canada Link CanadaJapan Link Japan Germany Link Central Europe D-Link Deutschland GmbHIndia Link India Italy Link Mediterraneo Srl/D-Link ItaliaLink U.S.A Sweden Link SwedenTaiwan Link Taiwan Turkey Link Middle East