D-Link DSL-504T Before You Start, About This User’s Guide, Installation Overview, Setup Wizard

Page 5

DSL-504T DSL Router User’s Guide

About This User’s Guide

This user’s guide provides instructions on how to install the DSL-504T ADSL Router and use it to provide Internet access for an Ethernet LAN.

If you are using a computer with a functioning Ethernet port, the quickest and easiest way to set up the DSL-504T is to follow the instructions provided in the Quick Installation Guide.

Before You Start

Please read and make sure you understand all the prerequisites for proper installation of your new Router. Have all the necessary information and equipment on hand before beginning the installation.

Installation Overview

The procedure to install the Router can be described in general terms in the following steps:

1.Gather information and equipment needed to install the device. Before you begin the actual installation make sure you have all the necessary information and equipment.

2.Install the hardware, connect the cables to the device and connect the power adapter.

3.Check the IP settings on your computer and change them if necessary so the computer can access the web-based software built into the Router.

4.Use the web-based management software to configure the device to suit the requirements of your ADSL service and private network.

The Setup Wizard

Many users will be able to configure all the settings necessary to use the DSL-504T with the Setup Wizard. For most ADSL users, the simplest way to setup the DSL-504T is to use the Setup Wizard to configure the Internet connection. Once you access the web interface used to configure the device, just launch the Setup Wizard to configure your Internet connection.

v

Page 4 Page 6
Image 5
Page 4 Page 6
Contents DSL-504T Adsl Router User’s Guide FCC Warning Table of Contents Status Information Setup Wizard Installation OverviewBefore You Start About This User’s GuideInstallation Requirements Username PasswordConnection Encapsulation TypePage Router Description and Operation What is ADSL?Introduction Router Features Standards Compatibility and Compliance Front Panel Display PowerStatus Link/ActAdsl port Connect to Adsl line Rear Panel ConnectionsFactory Reset Button Hardware InstallationPower on Router Connect Router to Ethernet Network ConnectionsConnect Adsl Line Computer to Router Connection Hub or Switch to Router ConnectionWan Configuration Summary Basic Router ConfigurationConfiguring IP Settings on Your Computer Configure Windows XP for Dhcp DSL-504T DSL Router User’s Guide Windows Configure Windows 2000 for DhcpWindows ME Double-click the Network and Dial-up Connections iconConfigure Windows 95 and Windows 98 for Dhcp Configure Windows ME for DhcpWindows 95 and Windows Click the Obtain an IP address automatically optionWindows NT 4.0 Workstations Configure Windows NT 4.0 for DhcpEnter Password Access the Configuration ManagerLogin to Home Web Manager First Time Log On Configure the RouterUsing the Setup Wizard Used for Router management Cannot be changed DSL-504T DSL Router User’s Guide DSL-504T DSL Router User’s Guide WAN Settings Menu PPPoE / PPPoA Configure WAN ConnectionPPPoE and PPPoA Connection for WAN Bridged Connection for WAN WAN Settings Menu Bridge ModeStatic IP Address for WAN WAN Settings Static IPConfigure LAN IP settings LAN IP SettingsDisable the Dhcp Server Dhcp Server Settings for the LANConfigure Dhcp server settings for the LAN Use the Router for DhcpDhcp Relay DNS Server SettingsConfigure DNS Settings Save and Reboot menu Save Settings and RebootMultiple Virtual Connections Configure Multiple PVCsSelect new PVC to configure in the WAN menu Configure new VC Home Advanced Router ManagementAdvanced ToolsUPnP Enable UPnP MenuVirtual Server Menu and List Port ForwardingRule Name Parameter DescriptionPrivate IP ProtocolDMZ DMZ IP address configurationFilters Filters Configuration MenuPort, Port Range or Safe Range ports above Firewall Firewall Configuration MenuDos Protection Port Scan Protection Service Filtering NAT NAT Enable/Disable MenuATM ATM Virtual Circuit configuration menuIgmp Proxy Service CategoryStatic Routing menu Static RoutingDynamic Routing RIP menu Dynamic Routing RIPRemote Management Menus Remote AccessSystem Tools Administrative functions Change System PasswordAdministrator Settings change password menu ToolsSave System Settings and Restore Defaults Save or Load Configuration FileRestore Factory Default Settings Time Time & Date ConfigurationFirmware Firmware UpgradePing and Diagnostics Test Menu Diagnostic TestTest Ping TestSave & Reboot Device Information Display Status InformationDhcp Clients Device Information displayLog display LogTraffic Statistics information TrafficAdsl Status information AdslTechnical Specifications CE Class B, FCC Class B Part Physical and EnvironmentalUsing the Default IP Address IP Address SetupAssigning Network IP Addresses Manual IP Address AssignmentChanging the IP Address of the Router Using DhcpIP Setup Example #2 IP Addresses IP ConceptsClass Beginning Address Ending Address IP Network ClassesIP Class Subnet Mask Subnet MaskMicrofilters Microfilter InstallationMicrofilters and Splitters Line Splitter Line Splitter InstallationPage Brazil Australia Link AustraliaCanada Link Canada Chile Link South America Sudamé ricaIndia Link India Germany Link Central Europe D-Link Deutschland GmbHItaly Link Mediterraneo Srl/D-Link Italia Japan Link JapanTaiwan Link Taiwan Sweden Link SwedenTurkey Link Middle East Link U.S.A

DSL-504T specifications

The D-Link DSL-504T is a versatile ADSL modem/router designed to meet the connectivity needs of home users and small offices. Recognized for its robust performance and user-friendly features, it serves as an ideal solution for those seeking reliable internet access through ADSL technology.

At the heart of the D-Link DSL-504T is its ADSL2/2+ compatibility, allowing for high-speed internet connections of up to 24 Mbps downstream and 1 Mbps upstream. This capability ensures that users can enjoy smooth online browsing, streaming, and gaming without interruptions. The device is equipped with a built-in 4-port Ethernet switch, enabling multiple wired devices to connect simultaneously. This feature is particularly valuable in environments where numerous devices require stable internet access, such as in small offices or households with multiple computers.

One of the standout characteristics of the D-Link DSL-504T is its user-friendly setup process. With a web-based management interface, users can easily configure their internet connection and customize settings. This interface provides easy navigation through various configuration options, including security settings, firewall management, and QoS (Quality of Service) provisions to prioritize bandwidth for essential applications.

Security is a top priority for the D-Link DSL-504T, which incorporates robust measures to protect users' networks. It supports WEP, WPA, and WPA2 encryption protocols, ensuring that wireless connections remain secure from unauthorized access. The device also features a built-in firewall that helps safeguard the local network from external threats.

Moreover, the DSL-504T supports various connection methods, including PPPoE, PPPoA, and DHCP, making it adaptable to different internet service providers and network environments. This flexibility ensures seamless integration into existing setups without requiring significant adjustments.

In terms of design, the D-Link DSL-504T features a compact form factor that allows for easy placement in any environment. The LED indicators on the front panel provide real-time status updates for power, DSL, internet, and local network activity, allowing users to monitor their connection at a glance.

In conclusion, the D-Link DSL-504T stands out as a reliable and feature-rich ADSL modem/router. With its high-speed connectivity, multiple connectivity options, robust security features, and user-friendly interface, it effectively caters to the demands of modern internet users while ensuring a stable and secure online experience.
Top Page Image Contents