D-Link DSL-504T manual Standards Compatibility and Compliance

Page 11

DSL-504T DSL Router User’s Guide

Standards Compatibility and Compliance

The DSL-504T complies with or is compatible with the following standards as recognized by their respective agencies.

ITU G.992.2 (G.lite “Splitterless ADSL”) compliant

ITU-T Rec. I.361 compliant

RFC 791 Internet Protocol compliant

RFC 792 UDP compliant

RFC 826 Address Resolution Protocol compliant (ARP) compliant

RFC 1058 Routing Information Protocol (RIP) compliant

RFC 1213 MIB II for IP compliant

RFC 1334 PPP Authentication Protocol compliant

RFC 1389 Routing Information Protocol 2 (RIP2) compliant

RFC 1483 IP over AAL5/ Bridged Ethernet over AAL5 compliant

RFC 1557 Classical IP over ATM (IPoA) compliant

RFC 1661 Point to Point Protocol (PPP) compliant

RFC 1877 Automatic IP assignment compliant

RFC 1994 Challenge Handshake Authentication Protocol compliant

Supports RFC 2131 and RFC 2132 DHCP functions including: automatic assignment of IP address, subnet mask and default gateway and provision of DNS server address for all hosts

RFC 2364 PPP over ATM compliant (PPPoA) compliant

RFC 2516 PPP over Ethernet compliant (PPPoE) compliant

RFC 2684 Bridged/Routed Ethernet over ATM compliant

IEEE 802.3 compliant

IEEE 802.3u compliant

IEEE 802.1d compliant

IEEE 802.3x compliant

Embedded web server support

Supports Dynamic Learning

Supports Static Routing

Supports NAPT for up to 4096 connections

Supports DHCP for up to 253 hot connections

Supports IGMP

Supports ATM Forum UNI 3.1/4.0

Supports ATM VCC (Virtual Channel Circuit) for up to eight sessions

Supports TELNET and TFTP

Supports back pressure for half-duplex

3

Image 11
Contents DSL-504T Adsl Router User’s Guide FCC Warning Table of Contents Status Information About This User’s Guide Installation OverviewSetup Wizard Before You StartInstallation Requirements Encapsulation Type PasswordUsername ConnectionPage Router Description and Operation What is ADSL?Introduction Router Features Standards Compatibility and Compliance Link/Act PowerFront Panel Display StatusAdsl port Connect to Adsl line Rear Panel ConnectionsFactory Reset Button Hardware InstallationPower on Router Connect Router to Ethernet Network ConnectionsConnect Adsl Line Computer to Router Connection Hub or Switch to Router ConnectionWan Configuration Summary Basic Router ConfigurationConfiguring IP Settings on Your Computer Configure Windows XP for Dhcp DSL-504T DSL Router User’s Guide Double-click the Network and Dial-up Connections icon Configure Windows 2000 for DhcpWindows Windows MEClick the Obtain an IP address automatically option Configure Windows ME for DhcpConfigure Windows 95 and Windows 98 for Dhcp Windows 95 and WindowsWindows NT 4.0 Workstations Configure Windows NT 4.0 for DhcpEnter Password Access the Configuration ManagerLogin to Home Web Manager First Time Log On Configure the RouterUsing the Setup Wizard Used for Router management Cannot be changed DSL-504T DSL Router User’s Guide DSL-504T DSL Router User’s Guide WAN Settings Menu PPPoE / PPPoA Configure WAN ConnectionPPPoE and PPPoA Connection for WAN Bridged Connection for WAN WAN Settings Menu Bridge ModeStatic IP Address for WAN WAN Settings Static IPConfigure LAN IP settings LAN IP SettingsUse the Router for Dhcp Dhcp Server Settings for the LANDisable the Dhcp Server Configure Dhcp server settings for the LANDhcp Relay DNS Server SettingsConfigure DNS Settings Save and Reboot menu Save Settings and RebootMultiple Virtual Connections Configure Multiple PVCsSelect new PVC to configure in the WAN menu Configure new VC Tools Advanced Router ManagementHome AdvancedUPnP Enable UPnP MenuVirtual Server Menu and List Port ForwardingProtocol Parameter DescriptionRule Name Private IPDMZ DMZ IP address configurationFilters Filters Configuration MenuPort, Port Range or Safe Range ports above Firewall Firewall Configuration MenuDos Protection Port Scan Protection Service Filtering NAT NAT Enable/Disable MenuATM ATM Virtual Circuit configuration menuIgmp Proxy Service CategoryStatic Routing menu Static RoutingDynamic Routing RIP menu Dynamic Routing RIPRemote Management Menus Remote AccessTools Change System PasswordSystem Tools Administrative functions Administrator Settings change password menuSave System Settings and Restore Defaults Save or Load Configuration FileRestore Factory Default Settings Time Time & Date ConfigurationFirmware Firmware UpgradePing Test Diagnostic TestPing and Diagnostics Test Menu TestSave & Reboot Device Information display Status InformationDevice Information Display Dhcp ClientsLog display LogTraffic Statistics information TrafficAdsl Status information AdslTechnical Specifications CE Class B, FCC Class B Part Physical and EnvironmentalManual IP Address Assignment IP Address SetupUsing the Default IP Address Assigning Network IP AddressesChanging the IP Address of the Router Using DhcpIP Setup Example #2 IP Addresses IP ConceptsClass Beginning Address Ending Address IP Network ClassesIP Class Subnet Mask Subnet MaskMicrofilters Microfilter InstallationMicrofilters and Splitters Line Splitter Line Splitter InstallationPage Chile Link South America Sudamé rica Australia Link AustraliaBrazil Canada Link CanadaJapan Link Japan Germany Link Central Europe D-Link Deutschland GmbHIndia Link India Italy Link Mediterraneo Srl/D-Link ItaliaLink U.S.A Sweden Link SwedenTaiwan Link Taiwan Turkey Link Middle East

DSL-504T specifications

The D-Link DSL-504T is a versatile ADSL modem/router designed to meet the connectivity needs of home users and small offices. Recognized for its robust performance and user-friendly features, it serves as an ideal solution for those seeking reliable internet access through ADSL technology.

At the heart of the D-Link DSL-504T is its ADSL2/2+ compatibility, allowing for high-speed internet connections of up to 24 Mbps downstream and 1 Mbps upstream. This capability ensures that users can enjoy smooth online browsing, streaming, and gaming without interruptions. The device is equipped with a built-in 4-port Ethernet switch, enabling multiple wired devices to connect simultaneously. This feature is particularly valuable in environments where numerous devices require stable internet access, such as in small offices or households with multiple computers.

One of the standout characteristics of the D-Link DSL-504T is its user-friendly setup process. With a web-based management interface, users can easily configure their internet connection and customize settings. This interface provides easy navigation through various configuration options, including security settings, firewall management, and QoS (Quality of Service) provisions to prioritize bandwidth for essential applications.

Security is a top priority for the D-Link DSL-504T, which incorporates robust measures to protect users' networks. It supports WEP, WPA, and WPA2 encryption protocols, ensuring that wireless connections remain secure from unauthorized access. The device also features a built-in firewall that helps safeguard the local network from external threats.

Moreover, the DSL-504T supports various connection methods, including PPPoE, PPPoA, and DHCP, making it adaptable to different internet service providers and network environments. This flexibility ensures seamless integration into existing setups without requiring significant adjustments.

In terms of design, the D-Link DSL-504T features a compact form factor that allows for easy placement in any environment. The LED indicators on the front panel provide real-time status updates for power, DSL, internet, and local network activity, allowing users to monitor their connection at a glance.

In conclusion, the D-Link DSL-504T stands out as a reliable and feature-rich ADSL modem/router. With its high-speed connectivity, multiple connectivity options, robust security features, and user-friendly interface, it effectively caters to the demands of modern internet users while ensuring a stable and secure online experience.