D-Link DSL-504T manual Access the Configuration Manager, Login to Home, Enter Password

Page 23

DSL-504T DSL Router User’s Guide

Access the Configuration Manager

Now that your computer’s IP settings allow it to communicate with the Router, you can access the configuration software.

Be sure that the web browser on your computer is not configured to use a proxy server in the Internet settings. In Windows Internet Explorer, you can check if a proxy server is enabled using the following procedure:

1. In Windows, click on the Start button, go to Settings and choose Control Panel.

2. In the Control Panel window, double-click on the Internet Options icon.

Note

3. Click the Connections tab and click on the LAN Settings button.

 

4.Verify that the “Use proxy server” option is NOT checked. If it is checked, click in the checked box to deselect the option and click OK.

Alternatively, you can access this Internet Options menu using the Tools pull-down menu in Internet Explorer.

Login to Home Page

To use the web-based management software, launch a suitable web browser and direct it to the IP address of the Router. Type in http:// followed by the default IP address, 10.1.1.1 in the address bar of the browser. The URL in the address bar should read: http://10.1.1.1.

A dialog box prompts for the User Name and Password. Type in the default User Name admin and default Password admin and click the OK button to access the web-based manager.

Enter Password

You should change the web-based manager access user name and password once you have verified that a connection can be established. The user name and password allows any PC within the same subnet as the Router to access the web-based manger.

Note

The user name and password used to access the web-based manager isNOT the same as the ADSL account user name and password needed for PPP connections to access the Internet.

15

Image 23
Contents DSL-504T Adsl Router User’s Guide FCC Warning Table of Contents Status Information About This User’s Guide Installation OverviewSetup Wizard Before You StartInstallation Requirements Encapsulation Type PasswordUsername ConnectionPage Router Description and Operation What is ADSL?Introduction Router Features Standards Compatibility and Compliance Link/Act PowerFront Panel Display StatusAdsl port Connect to Adsl line Rear Panel ConnectionsFactory Reset Button Hardware InstallationPower on Router Connect Router to Ethernet Network ConnectionsConnect Adsl Line Computer to Router Connection Hub or Switch to Router ConnectionWan Configuration Summary Basic Router ConfigurationConfiguring IP Settings on Your Computer Configure Windows XP for Dhcp DSL-504T DSL Router User’s Guide Double-click the Network and Dial-up Connections icon Configure Windows 2000 for DhcpWindows Windows MEClick the Obtain an IP address automatically option Configure Windows ME for DhcpConfigure Windows 95 and Windows 98 for Dhcp Windows 95 and WindowsWindows NT 4.0 Workstations Configure Windows NT 4.0 for DhcpEnter Password Access the Configuration ManagerLogin to Home Web Manager First Time Log On Configure the RouterUsing the Setup Wizard Used for Router management Cannot be changed DSL-504T DSL Router User’s Guide DSL-504T DSL Router User’s Guide WAN Settings Menu PPPoE / PPPoA Configure WAN ConnectionPPPoE and PPPoA Connection for WAN Bridged Connection for WAN WAN Settings Menu Bridge ModeStatic IP Address for WAN WAN Settings Static IPConfigure LAN IP settings LAN IP SettingsUse the Router for Dhcp Dhcp Server Settings for the LANDisable the Dhcp Server Configure Dhcp server settings for the LANDhcp Relay DNS Server SettingsConfigure DNS Settings Save and Reboot menu Save Settings and RebootMultiple Virtual Connections Configure Multiple PVCsSelect new PVC to configure in the WAN menu Configure new VC Tools Advanced Router ManagementHome AdvancedUPnP Enable UPnP MenuVirtual Server Menu and List Port ForwardingProtocol Parameter DescriptionRule Name Private IPDMZ DMZ IP address configurationFilters Filters Configuration MenuPort, Port Range or Safe Range ports above Firewall Firewall Configuration MenuDos Protection Port Scan Protection Service Filtering NAT NAT Enable/Disable MenuATM ATM Virtual Circuit configuration menuIgmp Proxy Service CategoryStatic Routing menu Static RoutingDynamic Routing RIP menu Dynamic Routing RIPRemote Management Menus Remote AccessTools Change System PasswordSystem Tools Administrative functions Administrator Settings change password menuSave System Settings and Restore Defaults Save or Load Configuration FileRestore Factory Default Settings Time Time & Date ConfigurationFirmware Firmware UpgradePing Test Diagnostic TestPing and Diagnostics Test Menu TestSave & Reboot Device Information display Status InformationDevice Information Display Dhcp ClientsLog display LogTraffic Statistics information TrafficAdsl Status information AdslTechnical Specifications CE Class B, FCC Class B Part Physical and EnvironmentalManual IP Address Assignment IP Address SetupUsing the Default IP Address Assigning Network IP AddressesChanging the IP Address of the Router Using DhcpIP Setup Example #2 IP Addresses IP ConceptsClass Beginning Address Ending Address IP Network ClassesIP Class Subnet Mask Subnet MaskMicrofilters Microfilter InstallationMicrofilters and Splitters Line Splitter Line Splitter InstallationPage Chile Link South America Sudamé rica Australia Link AustraliaBrazil Canada Link CanadaJapan Link Japan Germany Link Central Europe D-Link Deutschland GmbHIndia Link India Italy Link Mediterraneo Srl/D-Link ItaliaLink U.S.A Sweden Link SwedenTaiwan Link Taiwan Turkey Link Middle East

DSL-504T specifications

The D-Link DSL-504T is a versatile ADSL modem/router designed to meet the connectivity needs of home users and small offices. Recognized for its robust performance and user-friendly features, it serves as an ideal solution for those seeking reliable internet access through ADSL technology.

At the heart of the D-Link DSL-504T is its ADSL2/2+ compatibility, allowing for high-speed internet connections of up to 24 Mbps downstream and 1 Mbps upstream. This capability ensures that users can enjoy smooth online browsing, streaming, and gaming without interruptions. The device is equipped with a built-in 4-port Ethernet switch, enabling multiple wired devices to connect simultaneously. This feature is particularly valuable in environments where numerous devices require stable internet access, such as in small offices or households with multiple computers.

One of the standout characteristics of the D-Link DSL-504T is its user-friendly setup process. With a web-based management interface, users can easily configure their internet connection and customize settings. This interface provides easy navigation through various configuration options, including security settings, firewall management, and QoS (Quality of Service) provisions to prioritize bandwidth for essential applications.

Security is a top priority for the D-Link DSL-504T, which incorporates robust measures to protect users' networks. It supports WEP, WPA, and WPA2 encryption protocols, ensuring that wireless connections remain secure from unauthorized access. The device also features a built-in firewall that helps safeguard the local network from external threats.

Moreover, the DSL-504T supports various connection methods, including PPPoE, PPPoA, and DHCP, making it adaptable to different internet service providers and network environments. This flexibility ensures seamless integration into existing setups without requiring significant adjustments.

In terms of design, the D-Link DSL-504T features a compact form factor that allows for easy placement in any environment. The LED indicators on the front panel provide real-time status updates for power, DSL, internet, and local network activity, allowing users to monitor their connection at a glance.

In conclusion, the D-Link DSL-504T stands out as a reliable and feature-rich ADSL modem/router. With its high-speed connectivity, multiple connectivity options, robust security features, and user-friendly interface, it effectively caters to the demands of modern internet users while ensuring a stable and secure online experience.