Using the Configuration Utility (continued)
Advanced > Firewall
Firewall Rules is an advanced feature that is used to deny or allow traffic that passes through the
Firewall
Service-
Rule Name-
Schedule-
Action-
Priority-
Protocol-
IP-
Netmask-
Port-
Apply-
Select Enabled to enable the Firewall Service feature
Enter the name for the Firewall Rule
To schedule select OFF or ON
Choose to Accept or Deny the Firewall Rule
Select the Priority status of the Firewall Rule
Select the Protocol of the Firewall Rule
Enter the IP Address of both the Source and the Destination of the Firewall Rule
Enter the Subnet Mask of both the Source and the Destination of the Firewall Rule
Enter the Port of both the Source and theDestination of the Firewall Rule
Click Apply if you have made any changes
23