D-Link DWL-1750 warranty Special serial port optional, Power & Data Output Port

Connections

PoE Power Injector Attach one end of the power cord to the power port; attach the other end to the wall outlet.

Special Ethernet Port Connect one end of the MIL-C-5015 Ethernet Cable into this port; connect the other end into the Power and Data Output Port on the Inline Power Injector.

Reverse Polarity -N Type Connector for connecting the antenna or RF cable.

Data Input Port Connect one end of the cross-over Ethernet cable to this port; connect the other end to the Ethernet port on the computer.

Special serial port (optional)

Connect one end of the MIL-C-5015 style RS- 232 console port cable to this port; connect the other end to a Serial Port on a computer that is running a terminal emulation program. Set the terminal to 15200 Baud, No Parity, 8 data bits, 1 stopbit and ANSI compatible. Note: This connection is optional. Use this console connection only if you are configuring the DWL-1750 via the console.

Power & Data

Output Port

Attach one end of the special Ethernet cable to this port; attach the other end to the Special Ethernet Port on the DWL-1750.

5