D-Link DWL-1750 warranty Appendix Telnet Configuration

Appendix 1:

Telnet Configuration

The DWL-1750 is designed to operate as shipped from the factory without any special set-up. However, it has many options and parameters that can be changed if users have special requirements. Most of the management functions can be accessed using TCP/ IP protocol; it can also be configured by Telnet/Console.

Configure the DWL-1750 using a Telnet session on a wired LAN attached computer. To use the Telnet session, you can simply open a Telnet window using the IP address that has been assigned to the DWL-1750.

1.Go to Start >Run; open the Run dialog box.

Enter telnet 192.168.0.50 (the default terminal type of Telnet is VT100; the default Ethernet IP Address of the DWL-1750 is 192.168.0.50).

Click OK.

telnet 192.168.0.50

55