Using the Configuration Utility (continued)
Home > Mode > Remote Static IP Router
Select this option to input the Remote Static IP Address provided by your ISP
WAN - Wireless
IP Address-
Subnet Mask-
ISP Gateway Address-
DNS Server Address-
NAPT-
LAN - Ethernet
IP Address-
Subnet Mask-
Click Apply-
Input the IP Address assigned by your ISP
Input the Subnet Mask; all devices in the network must use the same Subnet Mask
Your ISP will provide this information
Your ISP will provide this information
Select Disable or Enable. NAPT is a form of NAT; it provides a type of firewall by hiding internal IP Addresses and it works as an inbound virtual server, with IP based access control
The default IP Address of the Ethernet port is 192.168.0.50
All devices in the network must have the same Subnet Mask
Click Apply if you have made any changes | 17 |