NETGEAR WGT624v4 manual Front of the Router, Status Lights

Router Setup Manual

The Front of the Router

5

24

13

Figure 1-1

You can use the status lights on the front of the router to verify various conditions.

Table 1-1.		Status Lights
Status Light			Activity	Description
1.	Power		On	Power is supplied to the router.
			Off	Power is not supplied to the router.
			On	The system is initializing or in the middle of a firmware upgrade.
2.	Test		Blink	Firmware is upgrading or restoring to factory default is done.
			Off	The system is ready and running.
			On	Indicates that the Wireless port is enabled.
3.	Wireless		Blink	Data transfer
			Off	The wireless router radio is off. (See Advanced Wireless Settings in
				the Reference Manual.)
			On -- Amber	The Ethernet cable is connected but the router has not gotten an
				Internet address.
4.	Internet		On -- Green	The router has an Internet address.
			Blink -- Green	Data is being communicated with the Internet.
			Off	No link is detected on this port.
			On (Green)	The local port is connected to a 100 Mbps device.
5.	LAN (Local Area		Blink (Green)	Data is being transmitted at 100 Mbps.
	Network) Lights		On (Amber)	The local port has detected a link with a 10 Mbps device.
	1-4		Blink (Amber)	Data is being transmitted at 10 Mbps.
			Off	No link is detected on this port.
1-2				Connecting the Router to the Internet

v1.0, April 2007