NETGEAR wn3000rp user manual Connect with Netgear genie Smart Setup

Page 10

N300 WiFi Range Extender

4.Connect your existing WiFi devices to the new extended network. Use the same WiFi password that you use for your WiFi router.

5.Unplug the extender and move it to a new location closer to the area with a poor WiFi signal.

The location that you choose must be within the range of your existing WiFi router network.

6.Plug the extender into an electrical outlet and wait one minute.

The Power LED lights green. If the Power LED does not light, press the Power button.

7.Use the Router Link LED on the front panel to help you choose a spot where the extender-to-router connection is optimal.

Connect with NETGEAR genie Smart Setup

You can use a web browser to connect to the extender and set it up.

To connect with the browser-based Smart Setup:

1.Use a WiFi network manager on a computer or mobile device to find and connect to the extender WiFi network.

After the connection with the computer or mobile device is established, the Client Link

LED lights solid green.

2.Open a web browser window from the same computer or mobile device. The browser takes you directly to NETGEAR genie smart setup.

Note: If you are not automatically directed to NETGEAR genie, launch a web browser and enter www.mywifiext.net in the address field. Enter admin for the user name and password for the password.

3.Select a WiFi network to extend and click the Continue button.

4.In the Password field, type the network password (also called passphrase or security key) and click the Continue button.

Install Your Extender

10

Image 10

Contents N300 WiFi Range Extender Compliance SupportTrademarks Contents Get to Know Your Extender Front Panel Front panel has LEDsExtender Side and Bottom Panels How the Extender WorksWhen to Use Your Extender Install Your Extender  To place the extender Connect to an Existing WiFi NetworkPlace the Extender  To connect with WPSConnect with Netgear genie Smart Setup  To connect with the browser-based Smart SetupInstall Your Extender Extender WiFi Performance Find the Best Location To cable a computer to the extender Ethernet port Cable a Computer or Device to the Ethernet Port To cable a device to the extender Ethernet port Settings  To log in to the extender after the initial setup Log In to the Extender After Initial SetupChange the admin Password  To change the password for the extenderSelect Maintenance Set Password Use the Setup Wizard to Connect the Extender to a NetworkSelect Setup Wizard Manage the Extender Network and Settings Add a WPS Client to the Extender Network View or Change Wireless Settings To view or change the wireless settings  To add a WPS clientSelect Setup Wireless Settings View or Change Advanced Wireless Settings To view or change the advanced wireless settings Set Up a Wireless Access List Select Advanced Wireless Settings To set up and enable the access list Select Setup IP Address Setup Set Up the Extender to Use a Static IP Address To specify a static IP address Monitor and Maintain the Extender  To back up the extender configuration settings Back Up the Extender ConfigurationRestore Saved Configuration Settings Select Maintenance Backup SettingsReturn the Extender to Its Factory Settings Use the Factory Reset Button to Restore Factory Settings To restore factory settings  To erase the extender’s current settingsUpgrade the Firmware Select Maintenance Firmware Upgrade View Wired and Wireless Network Devices To view devices on the network Select Maintenance Network Devices FAQs and Troubleshooting FAQs User name. adminCannot Log In to the Extender Cannot Join the Extender WiFi Network To get the translated MAC address FAQs and Troubleshooting Supplemental Information Factory Default Settings Technical SpecificationsN300 WiFi Range Extender Technical specifications

Related manuals

Manual 32 pages 50.17 Kb

Manual 32 pages 34.81 Kb