NETGEAR wn3000rp user manual Cable a Computer or Device to the Ethernet Port

Page 13

N300 WiFi Range Extender

Cable a Computer or Device to the Ethernet Port

You can use an Ethernet cable to connect a computer or device to the Ethernet port on the extender. Here are some examples of when you might want to do this:

•You want to use a computer to log in to the extender to view or change its settings, but you are having trouble connecting to the extender WiFi networks.

•You have already installed the extender and now you want to connect a device to the extender’s Ethernet port.

To cable a computer to the extender Ethernet port:

1. Install the extender so that it is connected to your existing network with a WiFi link.

2. Connect an Ethernet cable to the Ethernet port on the extender and to an Ethernet port on your computer.

The computer connects to the extender. Your computer might display a message notifying you of an Ethernet connection.

To cable a device to the extender Ethernet port:

1.Install the extender so that it is connected to your existing network with a WiFi link.

2.Connect an Ethernet cable to the Ethernet port on the extender and to an Ethernet port on your device.

Extender

Blu-ray player

WiFi router

The device connects to the extender. Now, the device can access your existing network through the extender.

Install Your Extender

13

Image 13

Contents N300 WiFi Range Extender Compliance SupportTrademarks Contents Get to Know Your Extender Front panel has LEDs Front PanelHow the Extender Works Extender Side and Bottom PanelsWhen to Use Your Extender Install Your Extender Place the Extender Connect to an Existing WiFi Network To place the extender  To connect with WPS To connect with the browser-based Smart Setup Connect with Netgear genie Smart SetupInstall Your Extender Find the Best Location Extender WiFi Performance To cable a computer to the extender Ethernet port Cable a Computer or Device to the Ethernet Port To cable a device to the extender Ethernet port Settings Change the admin Password Log In to the Extender After Initial Setup To log in to the extender after the initial setup  To change the password for the extenderSelect Maintenance Set Password Use the Setup Wizard to Connect the Extender to a NetworkSelect Setup Wizard Manage the Extender Network and Settings  To view or change the wireless settings View or Change Wireless SettingsAdd a WPS Client to the Extender Network  To add a WPS clientSelect Setup Wireless Settings View or Change Advanced Wireless Settings To view or change the advanced wireless settings Select Advanced Wireless Settings Set Up a Wireless Access List To set up and enable the access list Select Setup IP Address Setup Set Up the Extender to Use a Static IP Address To specify a static IP address Monitor and Maintain the Extender Restore Saved Configuration Settings Back Up the Extender Configuration To back up the extender configuration settings Select Maintenance Backup SettingsUse the Factory Reset Button to Restore Factory Settings Return the Extender to Its Factory Settings To erase the extender’s current settings  To restore factory settingsUpgrade the Firmware Select Maintenance Firmware Upgrade View Wired and Wireless Network Devices To view devices on the network Select Maintenance Network Devices FAQs and Troubleshooting User name. admin FAQsCannot Log In to the Extender Cannot Join the Extender WiFi Network To get the translated MAC address FAQs and Troubleshooting Supplemental Information Technical Specifications Factory Default SettingsN300 WiFi Range Extender Technical specifications

Related manuals

Manual 32 pages 50.17 Kb

Manual 32 pages 34.81 Kb