NETGEAR wn3000rp user manual Support, Compliance, Trademarks

Page 2

N300 WiFi Range Extender

Support

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates and web support, visit http://support.netgear.com.

Phone (US & Canada only): 1-888-NETGEAR.

Phone (Other Countries): Check the list of phone numbers at http://support.netgear.com/general/contact/default.aspx.

Compliance

For regulatory compliance information, visit http://www.netgear.com/about/regulatory.

See the regulatory compliance document before connecting the power supply.

Trademarks

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice.

© NETGEAR, Inc. All rights reserved.

2

Image 2

Contents N300 WiFi Range Extender Trademarks SupportCompliance Contents Get to Know Your Extender Front Panel Front panel has LEDsExtender Side and Bottom Panels How the Extender WorksWhen to Use Your Extender Install Your Extender  To place the extender Connect to an Existing WiFi NetworkPlace the Extender  To connect with WPSConnect with Netgear genie Smart Setup  To connect with the browser-based Smart SetupInstall Your Extender Extender WiFi Performance Find the Best Location To cable a device to the extender Ethernet port Cable a Computer or Device to the Ethernet Port To cable a computer to the extender Ethernet port Settings  To log in to the extender after the initial setup Log In to the Extender After Initial SetupChange the admin Password  To change the password for the extenderSelect Setup Wizard Use the Setup Wizard to Connect the Extender to a NetworkSelect Maintenance Set Password Manage the Extender Network and Settings Add a WPS Client to the Extender Network View or Change Wireless Settings To view or change the wireless settings  To add a WPS client To view or change the advanced wireless settings View or Change Advanced Wireless SettingsSelect Setup Wireless Settings Set Up a Wireless Access List Select Advanced Wireless Settings To set up and enable the access list  To specify a static IP address Set Up the Extender to Use a Static IP AddressSelect Setup IP Address Setup Monitor and Maintain the Extender  To back up the extender configuration settings Back Up the Extender ConfigurationRestore Saved Configuration Settings Select Maintenance Backup SettingsReturn the Extender to Its Factory Settings Use the Factory Reset Button to Restore Factory Settings To restore factory settings  To erase the extender’s current settingsUpgrade the Firmware  To view devices on the network View Wired and Wireless Network DevicesSelect Maintenance Firmware Upgrade Select Maintenance Network Devices FAQs and Troubleshooting FAQs User name. admin To get the translated MAC address Cannot Join the Extender WiFi NetworkCannot Log In to the Extender FAQs and Troubleshooting Supplemental Information Factory Default Settings Technical SpecificationsN300 WiFi Range Extender Technical specifications

Related manuals

Manual 32 pages 50.17 Kb

Manual 32 pages 34.81 Kb