N300 WiFi Range Extender
•You might have typed the network name, passphrase, or key incorrectly. Use the Setup Wizard to select a WiFi network from the list with detected networks, and retype the passphrase or key. The passphrase or key is
•If the extender cannot detect your WiFi network, check to see if your WiFi network is still working. Make sure that the wireless router is turned on. If possible, move the extender closer to the wireless router.
•If the extender Router Link 
LED is red, a poor wireless connection exists between the wireless router and the extender. You can establish the best connection with a clear line of sight between the extender and the wireless router. Make sure that no physical obstacles exist between the extender and the wireless router and try to move the extender closer to the wireless router.
•When you use the Setup Wizard, it automatically checks to see if you have a working Internet connection. If you cannot access the Internet with your computer or wireless device, the Setup Wizard displays the following message:
You are not able to connect to the Internet. Click Continue to run through setup again to connect to your network.
This message can display due to the following reasons:
-The extender cannot connect to the wireless router.
-The extender cannot get an IP address from the wireless router.
-The wireless router is not connected to the Internet.
Either run the Setup Wizard again or exit the Setup Wizard and try again later.
FAQs and Troubleshooting
33