NETGEAR wn3000rp user manual Return the Extender to Its Factory Settings

Page 25

N300 WiFi Range Extender

3.Type admin for the user name and type your password.

If you have not yet personalized your password, type password for the password.

4.Select Maintenance > Backup Settings.

5.Click the Browse button.

6.Locate and select the previously saved backup file.

By default, the name of the backup file is NETGEAR_WN3000RP.cfg.

CAUTION:

After you click the Restore button, do not try to go online, turn off the extender, shut down the computer, or do anything else to the extender until it finishes restarting!

7.Click the Restore button.

A confirmation pop-up screen displays.

8.Confirm your decision.

The extender restarts. This process takes about one minute.

Return the Extender to Its Factory Settings

To reset the extender to factory default settings, you can use either the Factory Reset button or the Erase feature. For information about the factory settings, see Factory Default Settings on page 35.

Use the Factory Reset Button to Restore Factory Settings

CAUTION:

This process erases any settings that you have configured in the extender.

Monitor and Maintain the Extender

25

Image 25

Contents N300 WiFi Range Extender Compliance SupportTrademarks Contents Get to Know Your Extender Front panel has LEDs Front PanelHow the Extender Works Extender Side and Bottom PanelsWhen to Use Your Extender Install Your Extender Place the Extender Connect to an Existing WiFi Network To place the extender  To connect with WPS To connect with the browser-based Smart Setup Connect with Netgear genie Smart SetupInstall Your Extender Find the Best Location Extender WiFi Performance To cable a computer to the extender Ethernet port Cable a Computer or Device to the Ethernet Port To cable a device to the extender Ethernet port Settings Change the admin Password Log In to the Extender After Initial Setup To log in to the extender after the initial setup  To change the password for the extenderSelect Maintenance Set Password Use the Setup Wizard to Connect the Extender to a NetworkSelect Setup Wizard Manage the Extender Network and Settings  To view or change the wireless settings View or Change Wireless SettingsAdd a WPS Client to the Extender Network  To add a WPS clientSelect Setup Wireless Settings View or Change Advanced Wireless Settings To view or change the advanced wireless settings Select Advanced Wireless Settings Set Up a Wireless Access List To set up and enable the access list Select Setup IP Address Setup Set Up the Extender to Use a Static IP Address To specify a static IP address Monitor and Maintain the Extender Restore Saved Configuration Settings Back Up the Extender Configuration To back up the extender configuration settings Select Maintenance Backup SettingsUse the Factory Reset Button to Restore Factory Settings Return the Extender to Its Factory Settings To erase the extender’s current settings  To restore factory settingsUpgrade the Firmware Select Maintenance Firmware Upgrade View Wired and Wireless Network Devices To view devices on the network Select Maintenance Network Devices FAQs and Troubleshooting User name. admin FAQsCannot Log In to the Extender Cannot Join the Extender WiFi Network To get the translated MAC address FAQs and Troubleshooting Supplemental Information Technical Specifications Factory Default SettingsN300 WiFi Range Extender Technical specifications

Related manuals

Manual 32 pages 50.17 Kb

Manual 32 pages 34.81 Kb