NETGEAR WNDR4500 user manual Statistics Button, System up time and poll interval statistics

Page 73

N900 Wireless Dual Band Gigabit Router WNDR4500

Connection. This shows if the router is using a fixed IP address on the WAN. If the value is DHCP Client, the router obtains an IP address dynamically from the ISP.

IP Subnet Mask. The IP subnet mask being used by the Internet (WAN) port of the router.

Domain Name Server. The Domain Name Server addresses being used by the router. A Domain Name Server translates human-language URLs such as www.netgear.com into IP addresses.

Statistics Button

On the Router Status screen, in the Internet Provider (WAN) Setup pane, click the Statistics button to display the following screen:

Figure 6. System up time and poll interval statistics

System Up Time. The time elapsed since the router was last restarted.

Port. The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port, the screen displays:

•Status. The link status of the port.

•TxPkts. The number of packets transmitted on this port since reset or manual clear.

•RxPkts. The number of packets received on this port since reset or manual clear.

•Collisions. The number of collisions on this port since reset or manual clear.

•Tx B/s. The current transmission (outbound) bandwidth used on the WAN and LAN ports.

•Rx B/s. The current reception (inbound) bandwidth used on the WAN and LAN ports.

•Up Time. The time elapsed since this port acquired the link.

•Poll Interval. The interval at which the statistics are updated in this screen.

To change the polling frequency, enter a time in seconds in the Poll Interval field, and click Set Interval.

To stop the polling entirely, click Stop.

Administration

73

Image 73

Contents N900 Wireless Dual Band Gigabit Router WNDR4500 Trademarks Technical SupportStatement of Conditions Contents Genie Advanced Home Administration Appendix a Supplemental Information Hardware Setup Position Your Router Unpack Your RouterFront Panel Hardware FeaturesLED Router, rear view Back PanelLabel Getting Started with Netgear Genie Types of Logins and Access Router Setup PreparationWireless Devices and Security Settings Use Standard TCP/IP Properties for Dhcp To use Netgear Genie to set up your router Netgear Genie SetupBrowse to http//routerlogin.net Upgrade Router Firmware Use Netgear Genie after InstallationRouter Dashboard Basic Home Screen Wi-Fi Protected Setup WPS Method Add Wireless Devices or Computers to Your Network To use WPS to join the wireless network Manual MethodGenie Basic Settings Internet Setup Screen Fields Internet SetupDoes Your ISP Require a Login? Answer either yes or no Internet IP Address Attached Devices ReadySHARE USB Storage Parental Controls To view or change basic wireless settings Basic Wireless SettingsWireless Network GHz b/g/n and 5.0 GHz a/n Wireless Settings Screen FieldsRegion Selection Change WPA Security Option and Passphrase Security Options SettingsGuest Networks  To set up a guest networkWPA Encryption Guest Network Wireless Security OptionsGenie Advanced Home Setup Wizard Select Advanced WPS Wizard WPS WizardSelect either Push Button or PIN Number Setup Menu WAN Setup  To set up a default DMZ server Default DMZ ServerChange the MTU Size Common MTU Sizes  To change the MTU size Select Advanced Setup WAN Setup To change the LAN settings LAN SetupUse the Router as a Dhcp Server LAN Setup Screen Settings To reserve an IP address Address ReservationEnable WMM QoS for Wireless Multimedia Applications Quality of Service QoS SetupSet Up QoS for Internet Access  To create a QoS policy for applications and online games QoS for Applications and Online GamingClick the Add Priority Rule button QoS for a Router LAN PortClick Add Priority Rule QoS for a MAC Address To edit or delete a QoS policy Editing or Deleting an Existing QoS PolicyUSB Storage USB Drive Requirements ReadySHARE AccessFile-Sharing Scenarios Storing Files in a Central Location for Printing Sharing PhotosSharing Large Files over the Internet  To share files with your friends and familyBasic Settings Add or Edit a Network Folder  To access your USB deviceUSB Storage Advanced Settings Available Network Folders Safely Remove a USB Drive Media Server SettingsSpecify Approved USB Devices  To connect to the router’s USB drive using a web browser Access the Router’s USB Drive Remotely Using FTPConnect to the USB Drive from a Remote Computer Select the Allow only approved devices check boxReadySHARE Printer ReadySHARE Printer  To set up ReadySHARE PrinterN900 Wireless Dual Band Gigabit Router WNDR4500 N900 Wireless Dual Band Gigabit Router WNDR4500 N900 Wireless Dual Band Gigabit Router WNDR4500 N900 Wireless Dual Band Gigabit Router WNDR4500 USB Control Center Utility USB Printer Control Center ConfigurationUSB Speaker Scan with a Multi-Function Printer To control a USB speaker Desktop Netgear Genie Security  To delete a keyword or domain Keyword Blocking of Http Traffic To specify a trusted computer  To block services Block Services Port FilteringSchedule Blocking  To schedule blocking Security Event Email Notifications To set up email notifications Administration Upgrade the Router Firmware View Router Status Internet Provider WAN SetupRouter Information LAN PortSystem up time and poll interval statistics Statistics ButtonView connection status information Connection Status ButtonWireless Settings 2.4 GHz and 5 GHz Guest Network 2.4 GHz and 5 GHz View Logs of Web Access or Attempted Web AccessManage the Configuration File Restore Configuration Settings Back Up Settings To restore configuration settings that you backed up Do not interrupt the reboot processPassword Recovery Set PasswordAdvanced Settings Advanced Wireless Settings Wireless repeating scenario Wireless Repeating Function WDSWireless Repeating Function  To set up the base station Set Up the Base Station To configure the router as a repeater unit Set Up a Repeater UnitPort Forwarding and Triggering Remote Computer Access BasicsDestination port number Port Triggering to Open Incoming PortsPort Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering  To set up port forwarding Set Up Port Forwarding to Local ServersAdd a Custom Service Editing or Deleting a Port Forwarding Entry Click Edit Service or Delete ServiceApplication Example Making a Local Web Server Public  To edit or delete a port forwarding entryUniversal Plug and Play on Set Up Port TriggeringN900 Wireless Dual Band Gigabit Router WNDR4500 Dynamic DNS Forward traffic to a changing IP address Static Routes  To set up a static route Remote Management Universal Plug and Play USB Settings To turn on Universal Plug and Play IPv6  To set up an IPv6 Internet connection typeTraffic Meter 103 Troubleshooting Network Settings Wireless SettingsQuick Tips Sequence to Restart Your NetworkPower/Test LED Is Off or Blinking Troubleshooting with the LEDsPower/Test LED Stays Amber LEDs Never Turn Off Wireless LEDs Are OffInternet or Ethernet Port LEDs Are Off Push N Connect WPS Button Blinks AmberCannot Log In to the Router Cannot Access the Internet109 Troubleshooting Internet Browsing Troubleshooting PPPoESelect Administration Router Status  To troubleshoot a PPPoE connectionRestore the Factory Settings and Password Wireless ConnectivityWireless Signal Strength Changes Not SavedTest the LAN Path to Your Router Troubleshoot Your Network Using the Ping Utility To ping the router from a running Windows PC Test the Path from Your Computer to a Remote Device Supplemental Information Factory Settings115 WNDR4500 Router specifications Technical Specifications117 Regulatory Compliance Information Netgear Dual Band WirelessEurope EU Declaration of Conformity 119 FCC Caution FCC Requirements for Operation in the United StatesImportant Note Radiation Exposure Statement Industry CanadaAvertissement GPL License AgreementInterference Reduction Table Index 124 125 126

Related manuals

Manual 130 pages 47.91 Kb